* Feature:

PET type, Glow up 5 hours, Unprintable, Untearable. The product is non-toxic, non-radioactive and has stable chemical properties.
In contrast to other products, this product has extremely low requirements for the stimulation light. A degree of normal 25LX brightness can be a source of stimulation light. Inside a building, the normal light degree can reach 500-600LX. Therefore, sunshine as well as normal bulb light can be used as sources of stimulating light.

* Technical Parameters :

* Luminescent Value:

* The initial lighting source is 1000LX; activating time is 15 minutes,

the luminescent value at 5 seconds> =4000 mcd/m2,.

the luminescent value at 30 minutes> =15 mcd/m2,

the luminescent value at 60 minutes> = 8 mcd/m2,

the luminescent value at 300 minutes> =1. 5 mcd/m2,

* Service Life: Indoor 8 years, outdoor 5 years

* Specification: 1. 24m x 45. 7m per roll

* Available color: light green

* Other technical datas:

 

1) Surface Film: PET type.

2)   Thickness of film: 0. 16mm, Thickness of Glue: 0. 04mm.
* Thickness of Release Paper: 0. 18mm, total thickness of products: 0. 38mm.

* Above thickness is with allowance of 5% more or less.

3) Weight of Release Paper: 165g/sqm with 5% more or less.

4) Type of Adhesive: Pressure-Sensitive Type.

5) Strength of Adhesive: after sticking to the board for 24 hours, at the condition of 0. 8kg, 5min, total length: 10cm, the falling Length is equal to or bellow 2cm.

6) Operation temperature: 10 centigrade --- 30 centigrade.

7) Working temperature: -20 centigrade --- 60 centigrade.
(After sticking to the board for at least 7 days)

* Storage temperature: 0 centigrade --- 30 centigrade.