Features Point to point utilization or used with C2810 FEA Single Fiber dual direction supported Auto negotiation and link detection with the ability for interface rate bounding Ethernet Data Frame is transmitted by the way of SAF (store and forward). VLAN (frame length of 1522 bytes) is supported and illegal frame filtering Complied with IEEE802.3X full duplex flow control: when congestion occurs, T202 will transmit a pause frame to ensure no data loss;Backoff half duplex flow control: when congestion occurs, T202 will transmit a jabber signal to delay the transmission of remote node to ensure no data loss; Broadcast Storm Control: Constrain the broadcast packet below 4% of the full network throughtput to avoid broadcast storm by network management system to enhance the safety for users ' network Management to the end: T203 has perfect network management and monitor function. When T203 is connected with C2810 FEB, the remote T203 ' s link status, link rate, duplex, MAC address, LED status, Jumper, might be monitored and some over the fiber more than 100 km. Meanwhile, the parameters of the embedded switch of T203, such as the auto negotiation, speed, duplex mode MAC address and VLAN setup can be configured online. Link Test: Fiber link status test can be set by network management software when it is connected with C2810 FEB Auto MDI/MDIX application The Straight/Crossover UTP can be detected and MDI/MDIX will be applied automatically Dimension W ? H ? D: 100 ? 32 ? 145mm, Box-shaped Working Power: DC ?C 48 ?( 1 ?50 %) AC 220V ?( 1 ?20 %) Power Consumption: Less than 5W