120W Single Output Switching Power Supply S-120 series
Features :
AC input range selectable by switch
Protections: Short circuit/Over load
Cooling by free air convection
100% full load burn-in test
Fixed switching frequency at 25KHz
Low cost
High reliability
| MODEL | S-120-5 | S-120-7.5 | S-120-10 | S-120-12 | S-120-15 | S-120-18 | S-120-24 | S-120-27 | S-120-48 | |
| OUTPUT | DC VOLTAGE | 5V | 7.5V | 10V | 12V | 15V | 18V | 24V | 27V | 48V |
| RATED CURRENT | 24A | 16A | 12A | 10A | 8A | 6.7A | 5A | 4.4A | 2.5A | |
| CURRENT RANGE | 0 ~ 24A | 0 ~ 16A | 0 ~ 12A | 0 ~ 10A | 0 ~ 8A | 0 ~ 6.7A | 0 ~ 5A | 0 ~ 4.4A | 0 ~ 2.5A | |
| RATED POWER | 120W | 120W | 120W | 120W | 120W | 120.6W | 120W | 118.8W | 120W | |
| RIPPLE & NOISE (max.) Note.2 | 100mVp-p | 100mVp-p | 100mVp-p | 100mVp-p | 100mVp-p | 100mVp-p | 100mVp-p | 100mVp-p | 100mVp-p | |
| VOLTAGE ADJ. RANGE | 4.75 ~ 5.5V | 6.75 ~ 8.25V | 9 ~ 11V | 10.8 ~ 13.2V | 13.5 ~ 16.5V | 16.2 ~ 19.8V | 21.6 ~ 26.4V | 24.4 ~ 29.7V | 43.2 ~ 52.8V | |
| VOLTAGE TOLERANCE Note.3 | ±2.0% | ±1.0% | ±1.0% | ±1.0% | ±1.0% | ±1.0% | ±1.0% | ±1.0% | ±1.0% | |
| LINE REGULATION | ±0.5% | ±0.5% | ±0.3% | ±0.3% | ±0.3% | ±0.3% | ±0.2% | ±0.2% | ±0.2% | |
| LOAD REGULATION | ±0.5% | ±0.5% | ±0.3% | ±0.3% | ±0.3% | ±0.3% | ±0.2% | ±0.2% | ±0.2% | |
| SETUP, RISE, HOLD TIME | 200ms, 80ms, 20ms at full load | |||||||||
| INPUT | VOLTAGE RANGE | 85 ~ 132VAC/180 ~ 264VAC selected by switch 255 ~ 370VDC | ||||||||
| FREQUENCY RANGE | 47 ~ 63Hz | |||||||||
| EFFICIENCY (Typ.) | 78% | 80% | 80% | 81% | 81% | 82% | 84% | 84% | 84% | |
| AC CURRENT | 2.8A/115VAC 1.4A/230VAC | |||||||||
| INRUSH CURRENT (max.) | COLD START 30A/115VAC 60A/230VAC | |||||||||
| LEAKAGE CURRENT | <1mA / 240VAC | |||||||||
| PROTECTION | OVERLOAD | 105 ~ 150% rated output power | ||||||||
| Protection type : Shut down o/p voltage, re-power on to recover. | ||||||||||
| ENVIRONMENT | WORKING TEMP. | -10 ~ +60℃ (Refer to output load derating curve) | ||||||||
| WORKING HUMIDITY | 20 ~ 90% RH non-condensing | |||||||||
| STORAGE TEMP., HUMIDITY | -20 ~ +85℃, 10 ~ 95% RH | |||||||||
| TEMP. COEFFICIENT | ±0.03%/℃ (0 ~ 50℃) | |||||||||
| VIBRATION | 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes | |||||||||
| SAFETY & EMC | SAFETY STANDARDS | Design refer to UL1012 | ||||||||
| WITHSTAND VOLTAGE | I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC | |||||||||
| ISOLATION RESISTANCE | I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC | |||||||||
| EMI CONDUCTION & RADIATION | Design refer to FCC Part15 J Conduction Class B | |||||||||
| OTHERS | MTBF | 322.4K hrs min. MIL-HDBK-217F (25℃) | ||||||||
| DIMENSION | 199*98*38mm (L*W*H) | |||||||||
| PACKING | 0.65Kg; 30pcs/21.43Kg/0.0250CMB | |||||||||