|
UF Membrane Modules for Water Treatment—AQU200 type
Main features:
1. Shell is made of ABS with excellent impact resistance capability. Thickness of wall is 10mm, which make sure that support pressure can reach 1MPa. 2. Conglutinating the joint of shell by France gumwater make sure it not leak and break and perfectly reach sanitation standard. 3. We have improved the moulding technology to multiple segmental types. The output water can flow freely from the pipe.
Technical Parameters:
Overall dimension: Φ192×1470mm Interface dimension: Φ50 (DN40) Connnection Mode: slipknot adhesion Shell material: ABS Membrane filament material: hydrophilic PVC End seal material: epoxy resin Configuration: hollow fiber Working Temp.:5-45℃ PH range: 2~13 Max TMP: 0.2Mpa Continous Tolerance to chlorine: 100ppm Tolerance to chlorine for short-term: 200ppm Max inlet pressure: 0.3Mpa Filtrate turbidity < 0.1NTU Removal rate of animalcule and bacterium::99.99% Removal rate of suspendend solids:100%
Applicable field:
1. Dual water supply, drinking water, municipal drinking water, rural water improvement, purification of residential water etc. 2. RO pretreatment of iron &steel industry, power industry, electronic industry, chemical industry etc. 3. Waste water recycling of printing and dyeing industry, paper making industry, electroplating industry, electronic circuit board industry, municipal sewage, oil field injection water,coal mine waste water,etc. 4. Seperation of soybean protein, heat source removal of medicine, recycling of electroplating, recycling of starch, food and drink, etc. | |||||||||||||||||||||||||||||||||||||||||||||
