1) Rated power: DC 12 V, 1 A

2) Contact resistance: measurement shall be made at with small current 1,000 Hz (1 A maximum)

3) Insulation resistance: a voltage of 500V DC shall be applied for 1 minute after which measurement shall be made

4) Dielectric strength: 500 V AC (50 Hz - 60 Hz) for 1 minute

5) Trip current: 2 mA

1) Soldering heat test: the terminal for a printed circuit board

2) Temperature of solder: 260

3) Dip time: 5±1 seconds

1) Temperature of solder: 350±10

2) Dip time: 3±1 seconds

* Cold: the jack shall be stored for 96 hours at a temperature of -25±3℃ immediately after which measurement shall be made.

* Dry heat: the jack shall be stored for 96 hours at a temperature of 70±2℃ immediately after which measurement shall be made.

* Contact resistance: 50 m ohms maximum

* Insulation resistance: 50 m ohms minimum

* Contact pressure: 0.5 N (50 gf) minutes

* Insertion force: 3 - 30 N (0.3 - 3.0 kgf)

* Withdrawal force: 3 - 30 N (0.3 - 3.0 kgf)