Key Specifications/Special Features:
- Electronics characteristics:
- Rating: DC 12V, 1A
- Contact resistance: 1kHz measured at small current (1A or less)
- Insulation resistance: a voltage of 500V DC shall be applied for a minute, and between conductors which should not make contact under normal conditions after which measurement shall be made
- Dielectric strength: between conductors which should not make contact under normal conditions 500V AC (50-60Hz) for 1 minute (trip current 2mA)
- Rating: DC 12V, 1A
- Endurance characteristics:
- Solder ability: the terminals shall be dipped into soldering flux and shall be immersed into molten solder of 230±5 degrees for a period 3±0.5 seconds
- Resistance to soldering heat:
- Solder temperature: 350±10
- Immersion depth: 2±0.5mm
- Immersion time: 3±0.5 seconds
- By a solder iron to have capacity of 60W
- Solder temperature: 350±10
- Cold: the jack shall be stored at a temperature of -40±2 for 96 hours
- It shall be subjected to the controlled recovery conditions for 0.5 hours after which measurement shall be made
- Dry heat: the jack shall be stored at a temperature of -70±2 for 96 hours
- It shall be subjected to the controlled recovery conditions for 0.5 hours after which measurement shall be made
- Humidity: the pin jack shall be subject to 90%-95%RH, 40±2 for 96 hours, and shall be conditioned at room ambient conditions for a period of 30 minutes
Payment Details:
Payment Terms: