Product Main

Specifications

High-frequency induction heating equipment(DH-GF36/50)
This is an professional wrought iron equipment which combine both high frequency heating and cold wind low temperature on itself, and such can guarantee the high efficiency, low consummation and protection for environment. This machine radically reform the older high frequency equipment which only characteristic with electronic oscillation; at the same time with cold wind temperature lowing device which replace the cold water pool. So save the time and money to set up a complicated water project. There are two wheels below the machinery body so you can remove the whole machine to anywhere which convenient your working anytime.
this machine can heat bar or tube within 3 seconds.
 

High-frequency induction heating equipment(DH-GF36/50)
Process ability
material
Flat steel
Square steel
Round steel
GF-50model
Less than 50X10mm
Less than 30X30mm
Less than diameters 30mm
GF-36model
Less than50x6mm
Less than 20X20mm
Less than diameters 20mm
Technical parameters
item
Input voltage of high frequency
Input voltage of water power
Input current
Out put current
oscillation frequency
Cooling hydraulic pressure
GF-50model
380V
50HZ
220V
6-50A
300-1800A
30-70KHZ
0.005MPa
GF-36model
380V
50HZ
220V
4-36A
300-1200A
30-50KHZ
0.005MPa
Main featurers
1. High-tech, protect environment, no smoke, no harmful gas, nearly no iron dross.
2. Small machine body only 0. 85 m3, low energy consummation, save on 60% compared with vacuum tube.
3. Heating rapidly, only need nearly 5 seconds; cooling rapidly. The temperature of water entrance is below 50℃.
4. Equipped with light and sounds alert system for over pressure, over flow and lack of water, so rather safe and credible to operate.
5. The heating loop is changeable, so can heating all kinds of fittings.
6. A wide range of applicability, can finish the process of heating, welding, quenching, anneal and so on .
dimension
1200mmX650mmX1260mm (LXWXH)
Net weight(㎏)
GF-50MOLD
285
GF-36MOLD
235
Gross weight(㎏)
GF-50MOLD
325
GF-36MOLD
275