DIM plug-in electromagnetic flow meter is used to measure conductive liquid which is particularly applicable to large-diameter pipeline measurement, and is widely used in petroleum, chemical, metallurgical, power, paper, food, water treatment and other industries.
Model: DIM Series
Caliber: DN350 - DN2000
Accuracy: ± 1.5% of measured values (standard); ± 1.0% of measured values(special); ± 0.5% of measured values (high precision)
The minimum conductivity: 5μs/cm
Measuring range: Recommend use of: 0.5m / s ~ 10m / s continuous adjustable; The greatest use of: 0.2 m / s ~ 15m / s continuous adjustable
Medium temperature: -20oC ~ +150oC
Environmental temperature: -20oC ~ +60oC
Fluid pressure: ≤1.6MPa
Grading Protection: Sensor Converters; IP67 IP67; IP68 IP67
Material: probe materials: SS304, electrode materials: SS316, insulation layer: PTFE
Electrical Interface: M20×1.5,1/2'' NPT
Shows: Standard dual LCD can also showed that the instantaneous and cumulative flow
Power: 220VAC 50HZ 24VDC
Explosion-proof grade: Exd[ia]iam ll CT5
Signal output: 1, volume can be set to switch: pulse output (maximum 1000 HZ); High / low flow alarm; ATC alarm; Signal flow direction; Fault Alarm. 2, current output :4-20 mA output
Configuration mode:
Caliber: DN350 - DN2000
Accuracy: ± 1.5% of measured values (standard); ± 1.0% of measured values(special); ± 0.5% of measured values (high precision)
The minimum conductivity: 5μs/cm
Measuring range: Recommend use of: 0.5m / s ~ 10m / s continuous adjustable; The greatest use of: 0.2 m / s ~ 15m / s continuous adjustable
Medium temperature: -20oC ~ +150oC
Environmental temperature: -20oC ~ +60oC
Fluid pressure: ≤1.6MPa
Grading Protection: Sensor Converters; IP67 IP67; IP68 IP67
Material: probe materials: SS304, electrode materials: SS316, insulation layer: PTFE
Electrical Interface: M20×1.5,1/2'' NPT
Shows: Standard dual LCD can also showed that the instantaneous and cumulative flow
Power: 220VAC 50HZ 24VDC
Explosion-proof grade: Exd[ia]iam ll CT5
Signal output: 1, volume can be set to switch: pulse output (maximum 1000 HZ); High / low flow alarm; ATC alarm; Signal flow direction; Fault Alarm. 2, current output :4-20 mA output
Configuration mode:
1, through three key scene manual configuration.
2, the scene through remote configuration.
3, a parade through hands-site configuration. Memory: The EEPROM memory will not disappear without batteries preservation.