■Brief Introduction |
J27 series printed circuit connectors (3 lines) are derived from the J27(2lines).There are 15 specifications in this series: 30, 45, 60, 75, 96, 105, 120, 135, 150, 165, 180, 195, 210, 225, 240 etc. According to the environmental level, this series products classified to common grade, grade I and gradeⅡ. Grade I and gradeⅡ implement the RY3.644.003JT. The common grade implement the Q/450300RYL2301-90 |
■Specification | |||||
Military standard | Grade Ⅱ | Grade Ⅰ | Common Grade | ||
Temperature | -65 to 125 ° C | -55 to 125 ° C | -55 to 125 ° C | -55 to 85 ° C | |
Relative Humidity | 40 ± 2 ° C for 92 ~ 95% | 40 ± 2 ° C for 92 ~ 95% | 40 ± 2 ° C for 92 ~ 95% | 40 ± 2 ° C for 92 ~ 95% | |
Low Pressure | 4.4kPa | 665~1.33Pa | 665~1.33Pa | 4.4kPa | |
Sine Vibration | 150m/s2 ,10~2000Hz | 150m/s2 ,10~2000Hz | 150m/s2 ,10~2000Hz | 100 m/s2 , 10~500Hz | |
Impact | 980 m/s2 | 980 m/s2 | 747 m/s2 | 490 m/s2 | |
Acceleration | 980 m/s2 | 980 m/s2 | 747 m/s2 | 245m/s2 | |
Working current | 3A | 3A | 3A | 3A | |
Working pressure | 250V | 250V | 250V | 250V | |
Mechanical life | 1000 | 1000 | 1000 | 1000 | |
Contact resistance | ≤0.01 ohm | ≤0.01 ohm | ≤0.01 ohm | ≤0.03 ohm | |
Withstand voltage | 1000V | 1000V | 1000V | 1000V | |
Insulation resistance | 5000M ohm | 2000M ohm | 2000M ohm | 1000M ohm | |
■How to order |
J27- 53 T K L I H |
① ② ③ ④ ⑤ ⑥ ⑦ |
①：J27 series |
②：Contact pairs No.9,17,29,41,53,65,72,84,96,110 |
③：Connector categories: T-plug Z-receptacle |
④：Type of contact: J-pin K-socket |
⑤：Contact method: X: upright, L: threaded connection , F: relocatable loader, No mark for common install |
⑥：Environment level: grade Ⅱ, grade I, No mark for common grade |
⑦：Contact terminal style: BC: right-angle, BW: bend angle, BW1: long bend angle, |
H: solder connection R: wrapped connection Y: crimp connection |