STRUCTURE FEATURES
-4 frame sizes cover the power range from 0. 25kw-3kw.
-Aluminum alloy whole casting with heat sink design for cooling provides great surface area and high thermal capacity so that the brake motor can work in the terrible operating environment.
-IP54 protection class for the outside shell, and the features of waterproof and dustproof have the motor run very well in the terrible operation environment.
-The standard of B and F insulation classes can have the brake motor run for 24 hours continuously.
-The precise dynamic balance compensation and low noise bearings have the brake motor run more smoothly and quietly.
-The brake is made from the wearable friction material without asbestos and it can produce the dry friction brake torque.
-Assembled with AC brake and no need of changeover device for DC. The connection is safe and reliable and the braking is much strong and fast.
-Fast response of braking and high brake frequency.
-When the preset sealing device of the out shaft is connected with the varator and the reducer, the sealing will be more safe.
. -Assembled with manual release handle for all models to have it installed and adjusted easily.
-Steel teeth keys are used to connect the brake plate and the rotating shaft and it can bear the strong impact during the braking process.
-There is the superior interchange ability between the IEC size standard and the IM mounted form..
UNIICATED STANDARDS
All brake motors perform the following definitude and uniform produce standard.
-Motor power rate and dimension: GB826-84; BG772. 2-84; IEC72
-Electric criterion: GB755-87; IEC34-1
-Structure and mounting position: GB997-81; IEC34-7
-Outside shell protection class: GB4942. 1-85; IEC34-5
-Cooling mode: GB/T1993-93; IEC34-6
-4 frame sizes cover the power range from 0. 25kw-3kw.
-Aluminum alloy whole casting with heat sink design for cooling provides great surface area and high thermal capacity so that the brake motor can work in the terrible operating environment.
-IP54 protection class for the outside shell, and the features of waterproof and dustproof have the motor run very well in the terrible operation environment.
-The standard of B and F insulation classes can have the brake motor run for 24 hours continuously.
-The precise dynamic balance compensation and low noise bearings have the brake motor run more smoothly and quietly.
-The brake is made from the wearable friction material without asbestos and it can produce the dry friction brake torque.
-Assembled with AC brake and no need of changeover device for DC. The connection is safe and reliable and the braking is much strong and fast.
-Fast response of braking and high brake frequency.
-When the preset sealing device of the out shaft is connected with the varator and the reducer, the sealing will be more safe.
. -Assembled with manual release handle for all models to have it installed and adjusted easily.
-Steel teeth keys are used to connect the brake plate and the rotating shaft and it can bear the strong impact during the braking process.
-There is the superior interchange ability between the IEC size standard and the IM mounted form..
UNIICATED STANDARDS
All brake motors perform the following definitude and uniform produce standard.
-Motor power rate and dimension: GB826-84; BG772. 2-84; IEC72
-Electric criterion: GB755-87; IEC34-1
-Structure and mounting position: GB997-81; IEC34-7
-Outside shell protection class: GB4942. 1-85; IEC34-5
-Cooling mode: GB/T1993-93; IEC34-6