* DIM plug-in electromagnetic flow meter is used to measure conductive liquid which is particularly applicable to large-diameter pipeline measurement, and is widely used in petroleum, chemical, metallurgical, power, paper, food, water treatment and other industries.
* Model: DIM Series
* Caliber: DN350 - DN2000
* Accuracy: ± 1.5% of measured values (standard) ±1.0% of measured values (special) ± 0.5% of measured values (high precision)
* The minimum conductivity: 5μs/cm
* Measuring range: Recommend use of: 0.5m / s ~ 10m / s continuous adjustable; The greatest use of: 0.2 m / s ~ 15m / s continuous adjustable
* Medium temperature: -20 - +150oC
* Environmental temperature: -20 - +60oC
* Fluid pressure: ≤ 1.6MPa
* Grading Protection: Sensor Converters IP67 IP67 IP68 IP67
* Material: probe materials: 304 stainless steel, electrode materials : 316 stainless steel, insulation layer : PTFE
* Electrical Interface: M20*1.5,1/2" NPT
* Shows: Standard dual LCD can also showed that the instantaneous and cumulative flow
* Power: 220VAC 50HZ 24VDC
* Explosion-proof grade: Exd[ia]iam ll CT5
* Signal output:
1. Volume can be set to switch: pulse output (maximum 1000 HZ);
High / low flow alarm;
ATC alarm;
Signal flow direction;
Fault Alarm;
2. Current output :4-20 mA output
* Configuration mode:
1. Through three key scene manual configuration.
2. The scene through remote configuration.
3. A parade through hands-site configuration.
* Memory: The EEPROM memory will not disappear without batteries preservation.