1. Technical Scheme No.1
Coil width: 300 mm
* Material:
(1) Coil Width: 300 mm
(2) Suitable Coil Thickness: 1.5 - 2.5 mm
(3) Suitable Raw Materials: Galvanized coil
* Machine components:
(1) Manual Un-coiler 1 set
(2) Roll-Forming M/C 1 set
(3) Hydraulic Cutting 1 set
(4) PLC Control System 1 set
(5) Product Rack (un-powered) 1 set
* Technical specification:
(1) Manual Un-coiler: Un-powered; single head; max.Capacity: 5000kg
Coil inner-diameter: 508 mm
(2) Independent Unit Style Roll-Forming M/C:
About 16 steps to form; Material of Roller: GCr15
Voltage:380V/50Hz; Main line speed: 10m/min;
(3) Hydraulic Cutting: Stop to cut, Post cut
Cutting tool material: Cr12, Heat treatment
(4) PLC Control System: Using Mitsubishi PLC Control the quantity, length automatically, LCD screen
(5) Product Rack (UN powered)
(6) Curving pipe forming machine
Option Hydraulic un-coiler
Hydraulic system to expand coil inner hole;
Frequency Inverter to regulate turning speed
Automatic stop device; Load capacity = Max.5Tons
2. Technical Scheme No.2
Coil Width: 280 mm
* Material:
(1) Coil Width: 280 mm
(2) Suitable Coil Thickness: 0.3 mm
(3) Suitable Raw Materials: Q235A; Yield bearing stress: 235 Mpa
* Machine components:
(1) Manual Un-coiler 1 set
(2) Roll-Forming M/C 1 set
(3) Hydraulic Cutting 1 set
(4) PLC Control System 1 set
(5) Product Rack (un-powered) 1 set
* Technical specification:
(1) Manual Un-coiler:
Un-powered; single head; max.Capacity: 5000kg;
Coil inner-diameter: 508mm
(2) Independent Unit Style Roll-Forming M/C:
About 22 steps to form; Material of Roller: 45# steel with chromizing on surface
Voltage:380V/50Hz; Main line speed: 6m/min;
(3) Hydraulic Cutting:
Stop to cut, Post cut,
Cutting tool material: Cr12, Heat treatment
(4) PLC Control System:
Using Mitsubishi PLC Control the quantity, length automatically, LCD screen,
(5) Product Rack (UN powered)
Option Hydraulic un-coiler
Hydraulic system to expand coil inner hole;
Frequency Inverter to regulate turning speed,
Automatic stop device; Load capacity = Max.5Tons;
Option Hydraulic un-coiler
Hydraulic system to expand coil inner hole;
Frequency Inverter to regulate turning speed,
Automatic stop device; Load capacity = Max.5Tons.