Product Main

Specifications

Product Feature
All of our electricity supply is subject to surges from time to time, which result in spikes that can be damaging to your household electrical appliances.
These spikes simply consume electricity, resulting in overheating, which shortens the life of our electrical appliances and wiring of our home. In extreme cases electrical spikes can cause burns, blow outs and even power cuts.
The Power Factor Saver helps to stabilize voltages and reduce currents in your power supplies. It improves the power factor by reducing the amount of electricity that is used from our utility company. This is accomplished by supplying electricity locally at the load by the use of specially designed capacitor. These advanced capacitor store the additional electricity needed for stabilizing electric current within an inductive load. (for example when we turn on our air condition unit).
Therefore, the amount of electricity purchased from our utility company by a power factor optimization has been greatly reduced and resulting in power savings for our home or office.
Now, with the help of Power Factor Saver, there is a smart way to reduce up to 30% of your electricity consumption every month. No more high electricity bill you have to pay. Now, you can Use Power With Le$$ Cost
Extra electrical power can also be loss naturally when being transmitted (call wire loss) or at the instant of turning on the electrical appliances.
Our Power Factor Saver does not consume much electricity itself. You can on it continuously 24 hours a day all year round without its affecting your electricity costs.
Power Factor Saver is suitable for inductive and capacitive appliances, such as air conditioners, refrigerators, washing machines, stereos, fluorescent lamps, electric fans, televisions, etc. (please refer to FAQ for Electrical Products Consumption Info)
It is so easy to use; just plug the Power Factor Saver in any of the indoor outlets of single phase 90V - 250V/ 50 Hz – 60Hz supplies. It will be more efficient if you choose a location where there are fewer appliances nearby and closest to the meter.

Reference for Typical Household Electrical Products Consumption Info
No.
Electrical Appliances
Watt
Amp
Consumption
With Energy Saver
1
Air – conditional 1 Hp
840
3. 50
20 cents per hour
Very Effective
2
Fan
84
0. 35
0. 2 cents per hour
Very Effective
3
Fluorescent Light
40
0. 17
288 cents per day
Very Effective
4
Television 29
100
0. 41
3 cents per hour
Very Effective
5
Refrigerator
550
2. 30
80 cents per day
Very Effective
6
Freezer
330
1. 38
45 cents per day
Very Effective
7
Washing Machine
1080
4. 50
0. 4 cents per min
Very Effective
8
Vacuum Cleaner
550
2. 30
0. 25 cents min
Very Effective
9
Air Purifier
550
2. 30
0. 25 cents per min
Very Effective
10
Computer
400
4. 10
12 cents per hour
Very Effective
11
Water pump
150
0. 63
4. 5 cents per hour
Very Effective
No.
Electrical Appliances
Watt
Amp
Consumption
With Energy Saver
1
Water Heater
2000
8. 33
0. 7 cents per min
No effect
2
Iron
1000
4. 16
0. 4 cents per min
No effect
3
Microwave
1300
5. 42
0. 5 cents per min
No effect
4
Rice Cooker
1000
4. 16
0. 4 cents per min
No effect
5
Cloth Dryer
3000
12. 5
1. 13 cents per min
No effect
6
Dish Washer
2700
11. 25
0. 8 cents per min
No effect

Product Testing Before & After Installation of Energy Saver
Before: Reading 0. 88
After: Reading 0. 44
(I will send demonstartion picture when you send email. )

Results
The energy saving is about 50% from the above testing. However there are many different types of electrical appliances used at home. The % of electricity saving will be changed (+/-) from time to time. The above testing shows 3 x 20W fluorescent light tubes were used, and the different is 0. 44 AMP
Comments:
The Power Factor Saver technology reduces and saves energy by stabilizing the voltage, reductions in peak power demand and wastage of low efficient power. The low-efficient power can be stored and recycled by Power Factor Saver while electrical appliances demanding electricity.
The Power Factor Saver has been undergone the technical appraisal by Hongkong Product Quality Inspection Institute and tested by laboratory with the essential requirements found in compliance with the European Standards (CE certified).
We have been submitting our Power Factor Saver to the certified Laboratory subsequently over the past 12 months, results in mean values are given as below:
Testing Condition
200V/50Hz
200V/60Hz
220V/50Hz
220V/60Hz
Before Energy Saver is used
0.591A
0.478A
0. 688A
0.547A
After Energy Saver is used
0.325A
0.209A
0.387A
0.229A
Energy - Saved in %
54%
43%
56%
41%
Daylight fluorescent light tubes were used for the testing in the laboratory. However, the condition applied in the laboratory and the normal home are different. We suggest that the % of energy-saving should be around 10%~25%.
Please note that the above figures are for reference only, the % of energy saved is also depends on the different electrical appliances. Which means, higher quality electrical appliances will help in giving better results of energy saving.

Packing Details:

Dimension
CBM
Weight
Inner color Box
12cm x 9. 5cm x 9. 5cm
(0. 001CBM),
250gr/box
Export carton Box
49cm x 51cm x 27cm
(0. 0674CBM)
12. 5Kg/box