Shelf forming machine is made according to market demand by the collection year production cold rolling equipment experience independently designs a series or products.
Product: Shelf column, Shelf crossbeam, Shelf stay rod, Shelf plywood etc.
Racking cold roll forming uses the PLC control.
Processing craft: auto-decoiler-flatting-feeder-punching-guide straight roll forming cut-to-length-recoiled.
Equipment composition: Auto- decoiler, Guider , Flatting , Feeder, Continuously punching, forming, Cut-to- length, Collection table , Electrical control etc.

Composing of Equipment:

1, Decoiler 1set
2, Leveler with 9 group rolls 1set
3, 315T Hydraulic Pressure Machine 1set
4, Punching & Cutting Mould 1set
5, Cutting-to-length 1set
6, Feeder 1set
7, Forming Machine 1set
8, Style 31085 of Forming Mould 1set
9, Vertical roll rack 4sets

Mass technique parameter of Production Line:

1, Capacity of equipment: about 76. 9kw
2, Speed of manufacture: 10000-15000mm/min, Or 2-3pcs/min(4320/piece)
3, Thickness of product: 3mm
4, Highness of product: 100mm
5, Width of Steel Material: 500mm
6, Diameter of Roll: 80mm

Mass technique Parameter of part equipment:

1, Decoiler
Style: Decoiler with two tapering shape.
Load: 4T,
Power:. 2. 2kw
Width of producing Material: 480mm
Max Capacity of Decoiler: 4000T
Coil Inner Diameter: 460-510mm
Coil Outer Diameter: 1200mm
2, Leveler
Style: First & postpositioned guidance
Total: 9 sets of roller: 4 sets of roller for delivering, 5 sets of roller for leveling
Power: 5. 5kw
Main device Material of Leveling Rollers: 40Cr/HRC48-52
Diameter of shaft: 118mm
Thickness of leveled plank: 2-4mm
Width of leveled plank: 300-520mm
The machine uses the ZQ350 speed reducer
3, 315T Hydraulic Pressure Machine. (Standard Style)
Power: 22kw
Hydraulic Pressure Machine is from famous suppliers in China.
4, Clamp feeding equipment with two sets clamp parts.
Power: 2. 2kw
5, Forming machine
Style of Machine: GY180
Group of Forming: 12 groups
Power of Forming Motor: 45kw
Style of retarder: ZQ650
Transmission way : Every rack has one gear power distribution box. Compared with chain drive and gear drive , it has long life high speed and lower noise.
Material of roller: 40Cr.
Material of Forming Mould: GCr15, Quenching Disposing HRC56-62.
6, Installation Dimension(L*W*H): 33000mm*3500mm*5000mm