Surface & Flush mounting Distribution Boards (DBs) for all types of Electrical Installations.

 

Epoxy Polyester Powder coated to textured Light Grey (RAL 7032)

Ingress Protection 65 (IP 65) as per IEC 529

Heavy Duty Distribution Boards Consists of Cabin, Gland plate/s with Neoprene gasket/s, Mounting Rails, DIN rails, Front Plates & Steel door

DIN rail unit can be removed from the cabin to facilitate faster wiring.

Collar frames of Flush Mounting Distribution Board are removable for easy  transportation and stocking.

Terminal section is covered by a separate front plate.

Neoprene gasket on door to prevent dust & water. (To maintain the IP rating) IP 65 protection

Concealed Hinge, door opens 120 degrees

Provision to fix door left or right hand side

Earth stud on door & cabin for earthing

Recessed back plate.

Mounting plate for MCCB can be adjustable in depth to accommodate different brands of MCCBs

Front plate is supplied as one plate. Modular separate front plates are available on request.

Neutral & Earth links are supplied.

Recessed gland plate

Back Embossed with a rib for extra strength

Gland plate is fixed with Copper studs. No screws are penetrated outside, (To maintain the IP rating)

Openings are covered with plastic plugs.(To maintain the IP rating)

Distribution Board are supplied with steel front door, Glass front Door is available on request.

Door lock is IEC lock with common key. Other lock options are available on request.