The friction between the piston and cylinder barrel and the burning of the fuel cause some unwanted particles during the operation of the engine.

 

Our oil filters filter these particles and send the required amount of clean oil to the engine. We produce spin-on and element type filters to be used during the partial and full flow process in the lubrication lines of the internal combustion engines and in other machine-equipments. Our firm ensures full lubrication and filtration on your engines and equipments.

1.Made of high quality metal material. High reliability, productivity and performance;
2.Good sealing rubber to prevent against leakage
3. All parts are under rigid quality control before shipment, ISO9001:2000 certified.
4. 20 gpm maximum flow; 50 psi maximum working pressure;
  Resin-impregnated cellulose media;10micron 30 micron 60 micron available
5.Equipped with anti-drain valve and by-pass valve
6.Variety of media for different operating condition

7.Have a long life

 

Application:
Particulate filtration
For use with diesel, gasoline, and ethanol or methanol blends up to 10%
Use with low-volume commercial power pumps
For use on above ground storage tanks above ground gravity flow dispensing, transfer tanks.

 

Oil Filters by material

1.     Spin-on metal material

2.     Eco with PVC end cap

3.     Eco with PU end cap

4.     Eco with metal end cap