10/100/1000Base-T Media converter.

10/100/1000Mbps managed Media Converter.

10/100/1000Mbps managed Media Converter SNMP/WEB/Console Management types.

10/100/1000Mbps managed Media Converter SNMP/WEB/Console Management types, Bandwidth Control at step 32Kbps.

VeeCOM  Gigabit Series Media Converter is designed to meet the needs for massive fiber network deployment and able to extend a legacy copper based Ethernet network via fiber cable to a maximum distance up to 120Km. It is fully compliant with IEEE802.3z standards; built-in Switch ASIC has turned the device function more like a 2 ports switch than a traditional converter. User can get all switching benefits such like traffic segmentation, frames checking & error filtering.
The installation and operation procedures of the device are simple and straightforward. Operation status can be monitored through a set of Diagnostic LED located in the front panel.

Support 1000Base-T, 1000Base-LX&1000Base-SX

Convert 1000bps Ethernet copper port to optical port

Fiber type: Multimode and single mode optional, double strand and single strand optional

Up to 80Km distance on single-mode fiber

Allow transmitting and receiving VLAN data packet

Two types optional: stand-alone unit and Modular Chassis

Internal power supply, including AC220V or DC-48V

Ethernet Copper Port
Data rate: 10M, 100M, 1000Mbps
Auto-negotiate on Full/Half duplex topology
Connectors: RJ-45 Connector
Auto MDI/MDI-X

Optical Port
Support 1000Base-LX&1000Base-SX
Connectors: SC/ST/FC single mode or Multimode
Single Strand and Double Strand fiber port optional
Single-mode wavelength: 1310nm and 1550nm
Multimode wavelength: 850nm and 1310nm
Single-mode wavelength: 1310nm and 1550nm

Device Size
Standalone : 110mm*140mm*40mm
Chassis : 19inch*250mm*125mm

Power
Voltage: 100~240VAC or -48VDC
Power Consumption: <3 Watts

Environment
Temperature: 0-50oC
Humidity: 0-90%(non-condensing)