Product Main

Specifications

Vacuum Transformer Oil Recycling, Insulation Oil Recycling plant (Attn: Marian, T: 86 159 2300 0154)
Usage:
This oil purification equipment is applied to recycle various of unqualified or used insulation oil, including transformer oil, mutual inductor oil, circuit breaker oil and so on. It also can be used to inject the oil into the insulation device directly, and vacuum evaporate the oil.
 
Features:
1. Eliminates water, gas and impurities effectively by utilizing the unique technology of 3D Stereo-Evaporation, hence improve the voltage withstand strength and the quality of oil, which ensures a safe operation of power generation equipment.
2. It can inject the insulation oil into the transformer devices, and has the function of electrification online operation.
3. This machine has the advantages of small size, high efficiency and easy to move, so it is convenient to operate at various sites.
4. Adopts double infrared liquid control automatically system to control inlet and outlet the oil smoothly.
5. Trinity interlock and protection device, achieved man separate with machine really.
6. ZJB-T series equipment can be used for testing insulator withstand voltage and print the result automatically.
7. This machine can work independently, also it can work with the oil regeneration system that can eliminate the acid, the color and reduce the PH value effectively, then further enhance the insulation value of oil.
 
Superiority:
This series of machine is high efficiency vacuum oil purifier, it adopts the technology of Trinitarian flash evaporation, and applies the new absorptive materials which can effectively absorb the impurities, the jelly substance in oil, and eliminate the acid content. So the effect is 5-8times higher than the common machine. The machine is also environment-friendly and energy-saving
 
Working principle
When the oil purification starts, firstly contaminated oil enter into heater, secondly flowed into pre-filter under the difference pressure, in which the large impurities are removed. Thirdly oil goes into intermediate filter. Fourthly oil flow into water separator, the water separator adopts a special skill which changes the change the impaction of oil and water
to speed up trace water and coagulate big water which is separated from oil and stored in water content. After that, oil passes through the fine filter and fine particles of matters is
removed during the process. Finally oil flows into vacuum pump which use stereo-evaporation removing residual trace of water and steam is condensed in the condenser or expelled out by the vacuum system. the oil was transported out by oil pump. The purification process has finished.