Introduction

FM Transmitter enables the wireless connection between your portable music player such as iPod, CD, MP3, PDA etc., and the radio receiver of your car or any other FM stereo receiver at home. With the FM Transmitter, you can enjoy music of your portable device even when you are driving or with your home stereo system.

 

Features

* Transmit stereo audio from your portable music player wirelessly to your car radio or home radio receiver

* Powered by AAA battery, car cigarette receiver or USB port of PC / Mac

* Illuminated LCD displays transmitting frequency, power, time and temperature information

* FCC, CE, RoHS Certificate Obtained

* Hight-clarity, full-stereo sound

* 205 channels available

* 3 radio pre-set channels

* Power save chipset inside

* Simple installation and set up

* Light and compact design for easy carriage

 

Specifications

* Frequency Channel : 200 Channels 87. 5 - 108Mhz (Interval 0. 1Mhz)

* Frequency Response : 30Hz - 20kHz

* Separation : > /= 50dB

* Operating Current : 28mA

* Transmit Distance : > 5M

* Distortion < /= 3% (F = 75kHz, f=1kHz)

* Signal to Noise Ratio > /= 45dB

* Accessory: car adapter

* Dimensions: H 18mm x W 75mm x D 52mm

* N. W. : 38g

* G. W. : 104g

* Packing: Blister packing

 

Compatible with

* MP3, MD, CD, VCD, DVD, PDA, Cassete, Laptop, recording pen, repeating machine, Portable TV, Game machine, Cellphone etc. With 3. 5mm standard jack.

 

How to use

* Insert two pieces of 1. 5V AAA Size Batteries(Not Incuded) in the battery compartment. The LCD display will show the time.

* Press ON/OFF button once enter transmit mode, LCD will show the current transmit frequency, Press "Channle Up/Dowm" button to increase or decrease frequency. Press ON/OFF button once again to stop transmit and the real time will show on LCD display.

* When you want store current frequency, press M1, M2 or M3 button for about 3 seconds for the store location for you to select frequency easily. When you want to use the store frequency, press M1, M2 or M3 button once. The memory number will show on display.

* When the unit show the time, press and hold SET button for about 3 seconds enter setting mode, the last number of minute will flash, press Channel Up/Down button to set your desired digit, press SET button to confirm and enter to set the first digit of minute, using the same operation to set the digit of minute and hour. The LCD will show the time after not pressing button for about 3 seconds.

* When in the transmit state, press SET button will show the time for about 3 seconds.

* Press Channel Up/Down button once, turn on Flashlight, press channel Up/Down button again, Turn off Flashlight