Product Description
Fiberglass Geogrid:
Fiberglass Geogrid is characterized by high-intensity, low elongation, high temperatures, used in road paving asphalt layer with a combination of road, the road to be increased, and reinforcement to prevent the track surface fatigue crack, crack stretching hot and cold And the following reflection cracks, and the road to spread stress load, to extend the service life of the road. Can also be used to the old cement road, airport runway maintenance. For adoption by the targeted structures, to make full use of yarn in the fabric strength and improve its mechanical properties, it has a good tensile strength, tear strength and creep resistant properties. Products with high strength, light weight, high modulus, toughness, corrosion-resistant, long life, etc., can be widely used in railways, highways, dams, river banks, slope protection, road bridge to enhance handling in the field of engineering.
Product Feature
Description of Fiberglass geogrid:
Resistance to Fatigue Cracking
The fiberglass geogrid in asphalt surface can disperse the compressive strength and tensile strength produced when wheels rolled over the pavement. Buffer zone will be formed between two strength areas, and the strength is gradually changed rather than suddenly changed, thus the damage of strength to the asphalt surface is reduced. In the mean time, low elongation rate of the fiberglass geogrid reduced the deflection of the pavement, and protect the pavement from excessive deformations.
High Temperature Rutting Resistant
When using fiberglass geogrid in asphalt surface, it acts as skeleton in the surface. Aggregate in the asphalt concrete exists throughout the grid. A composite constraint force in the asphalt surface. The mutual containment of each other in asphalt surface prevents the bed-load of the asphalt surface and resists the effects of rutting.
Low temperature shrinkage cracking resistant
In low temperature, asphalt concrete will shrink in cold and tensile strength will be produced. If the tensile strength exceeds the tensile strength of asphalt concrete, it will crack. The application of fiberglass geogrid in asphalt surface, improves the horizontal tensile strength of the surface, and greatly improves the tensile strength of asphalt concrete, thus great tensile strength can be resisted without any damage. In addition, even if some area cracks, the strength in the crack will disappear in their transmission in fiberglass geogrid. Cracks will not develop into fissures.
Delay and reduce reflective fissures
Through paving fiberglass geogrid interlayer in the asphalt, the shearing or tensile strength caused by traffic load will be resisted, strain will be released. It will act as tensile improvement material of asphalt concrete, and the purpose to delay and reduce fissures will be achieved.
Features: Fiberglass griding fabric or cloth offers high tensile strength in both vertical and horizontal direction, low elongation, high elastic modulus, high and low temperature resistant properties. Fiberglass griding fabric offers excellent anti-aging properties and anti-alkali property after being coated.
In one word, high quality fiberglass geogrid.
Product Specification/Models
Specifications of Fiberglass geogrid:
EGA1×1 50KN, EGA1×1 60KN, EGA1×1 80KN, EGA1×1 100KN, EGA1×1 110KN.
EGA2×2 series.
Application
Applications of Fiberglass geogrid:
Uses of Fiberglass GeoGrid Fabrics: It is widely used in asphalt pavement, the enhancement of cement and concrete pavement of road. Compared with the traditional road, using fiberglass geogrid fabric can reduce costs, increase long work life and prevent reflective crack of road. This kind of fiberglass fabrics can also be used in reinforcing of soft soils and road root for railways, airports, water conservancy, dams, etc.
Other Information
Sales manager: Danny
Mobile phone:0086 15075828982
Fax: +86 318 2353322
Tel: +86 318 7950616
OfficialEmail(MSN): baolisl@yahoo.com
Skype ID: baolisl
Company Name: Hengshui Baoli Engineering Plastic Co.,Ltd.
Address: No.589 Shunping Street High-tech Developing Zone, Hengshui City, Hebei Province, China.
Payment
T/T, L/C.
Delivery
7-15 days
Origin
Factories in Hengshui City of China.
Minimum Order
250 sqm
Packaging
Weave bags of black or yellow colour.
Inspection
Any time.
Samples
Free
Sample Price
US$0
Remarks
We can supply "Baoli" brand or OEM.