It’s mainly used to smash the coal gangue, shale, slag and other scleroid raw materials.
INSTRUCTIONS FOR USERS
The fastening piece should be checked before using the machine, especially the oil site and all parts of bolts. Please make sure all parts of oil site have enough oil. And after fastening firmly the loosening bolts and cleaning up the broker’s spare things, it is the right time to operate the machine. Under the normal condition, please pay attention to homogeneous material in order to escape from blocking the machine. No excessive materials and no adding while you operate the machine which in order to avoid breaking the machine.
The easy-broken parts: the moving jaw plates, the static jaw plates, guard plate in both sides and head plate.
Main technical data:
|
model
Data |
PE250×400 |
PE400×600 |
PE500×750 |
PE600×900 |
PEX150×750 |
PEX250×1000 |
|
The size of feeder ‘s entrance (mm) |
250×400 |
400×600 |
500×750 |
600×900 |
150×750 |
250×1000 |
|
The adjustable range of discharge hole (mm) |
20-80 |
40-160 |
50-100 |
65-180 |
10-50 |
15-50 |
|
The largest particle size of feeding material (mm) |
210 |
350 |
425 |
500 |
120 |
210 |
|
Eccentric shaft speed(t/m) |
318 |
275 |
275 |
250 |
330 |
330 |
|
Theoretical handing ability （m3/h） |
4-14 |
8-20 |
30-60 |
40-70 |
15-35 |
30-60 |
|
Power （KW） |
15 |
30 |
55 |
75 |
15 |
37 |