Main specification:
1. Model: UF-06A-I/ UF-06A-II/ UF-AB-III
2. Maximum input power: UF-06A-I: 6.6KW ; UF-06A-II: 6.6KW ; UF-06AB-III: 6.6KW
3. Oscillatging frequency: UF-06A-I:100-500KHZ ; UF-06A-II: 200-700KHZ ; UF-06AB-III:0.4 -1.1MHZ
4. Input voltage: 220V, single phase, 50HZ or 60HZ
5. Maximum input current: 30A
6. Duty cycle: 100%
7. Cooling water desire: 3L/min 0.2Mpa
8. Water temperature protection point: <45oC
9. Auto heating time, retaining time: 0.1-99.9Sec.
10. Weight and size:
Model |
N.W./ G.W.(kg) |
Size (L xW xH) |
packing size |
UF-06A-I |
22kg/27kg |
580x260x500mm |
680x360x600mm |
UF-06A-II |
22kg/27kg |
580x260x500mm |
680x360x600mm |
UF-06A-III controller |
18kg/23kg |
520x240x500mm |
620x340x600mm |
UF-06A-III transformer |
2kg/7kg |
140x140x96mm |
240x240x106mm |
Features:
1. With high frequency up to 500KHZ-1.1MHZ, the quenching thickness can be controlled lower than 1mm, and very thin and tiny parts can be easily heated.
2. IGBT and inverting technologies of third generation been used; higher reliability and lower maintenace cost.
3. 100% duty cycle, continuous working is allowed at maximum power output.
4. Constant current or constant power status can be selected accordingly to achieve higher heating efficiency;
5. Display of heating power and heating current and oscillating frequency.
6. Simple to install , installation can be done by unprofessional person very easily;
7. Light weight, 24KG only;
8. Advantages of the model with timer: the power and the operating time of the heating period and the retain period can be preset respectively, to realize a simple heating curve, this model is suggested to use for batch production to improve the repeatability.