Machine introduction

This machine have powered outfeed conveyor and powered conveyorized turntable system and is able to transport an wrapped load from the turntable to the outfeed conveyor if there is no wrapped load on the outfeed conveyor. The operator can start wrap cycle by remote control allowing the operator to do other tasks. This arrangement eliminates the need for operators to place unwrapped loads on the floor, then pick them up again when the turntable is clear. During the machine auto wrap one palletized load, the operator can get one new unwrapped load, if there is no pallet on turntable, operator can put the new one, then take the wrapped load from the outfeed conveyor to the warehouse. Compared to a single turntable system. It increase fork lift efficiency and reduce handling time.

Controls

OMRON PLC      control system

Photo-eye pallet height sensor

0-9 separate top ,bottom & up-down wrap count selectors

Photoeye sensing delay

Reinforce wrap allow more wrap on same location

Film Tension Control adjustment on the panel

0—15RPM variable turntable speed by frequency changer

Separate variable carriage up/down speed 

Cycle pause capability

Separate start, reset and emergency stop buttons

Manual carriage up/down switch

Turntable jog button

Conveyor Jog (for each conveyor)

Dust-tight Precious Metal Slip-ring for long reliable service

Remote Control

Turntable

1800mm Diameter Structural steel plate

625mm high profile turntable

Position turntable alignment

Soft start/ Soft stop

Heavy duty chain drive

Table Fully Shrouded for Greater Personnel Safety

Film Carriage

Powered pre-stretch system up to 250% to min film consumption(Prestretch ratio can be specially made according your requirements.)

Carriage door opens for effortless roll change and thread film

Film delivery variable speed by separate DC Drive Motor

Film dancer-bar with variable speed output

Heavy duty double-chain carriage lift, calm and safety

Conveyor

Heavy Structural steel Frame construction

All rollers driven

Heavy Duty Conveyor Guards

Adjustable Leg Height

Different Roller Diameters and Roller Spacing Available

Conveyor Speed:12m per min(other speed available)

Photo-eye Pallet Sensing and sequencing

Technology Data

Wrapping size（L*W） （500~1200）×（500~1200）mm

Turntable diameter                   1800mm   

Turntable Height                     625mm

Turntable weight capacity              2000kg

Turntable speed                       0-15rpm

Machine weight                       700kg

Electrics                        220V 50HZ 1Phase

Power                                2.3kw

Air                                  0.4—0.6 Mpa                          

Packing efficiency           40-60 loads/h base on load

Option

Packing height:     2800mm

Turntable diameter: 2000mm

Turntable capacity: 2500kg, 3000kg

Addition conveyors & other type ( chain, belt ) available

Other

Hinged mast for easy handling

Forklift transportable