achinery. It is mainly used for diging into mine laneway and blasting holes in all drilling works. It is indispensably importance machine tool in metallurgy, coal, railway, traffic, water conservancy construction and national defence stone project.
It is suitable for drilling and blasting under various of rocks at any direction angles. Blast hole dia is 34-42mm,drill hole depth is 5 m This machine may match with Model FT160BD short air leg or Model FT160BC long air leg.
This machine has transparent surface of FY200B oil reservoir, easy to observe the oil lever, adjust oil quantity, ensure the well lubricated.
It is suitable for drilling and blasting under various of rocks at any direction angles. Blast hole dia is 34-42mm,drill hole depth is 5 m This machine may match with Model FT160BD short air leg or Model FT160BC long air leg.
This machine has transparent surface of FY200B oil reservoir, easy to observe the oil lever, adjust oil quantity, ensure the well lubricated.
| Weight： | 26kgs |
| Overall length： | 661 mm |
| Cylinder Dia: | 80mm |
| Piston stroke: | 80mm |
| Operating air pressure： | 0.4-0.63MPa |
| Impact frequencey: | 28-36Hz |
| Air-pipe bore(inner Dia.)： | 25 mm |
| Water-pipe bore(inner Dia.)： | 13 mm |
| Air consumption： | 66.7 L/S |
| Drill rod trailer： | 22 x 108 mm |
| Type FT160BD air leg(optional) | |
| Leg length： | 1400mm |
| Propulsion stroke： | 965mm |
| Weight： | 14.4kg |
| Cylinder dia: | 65mm |
| FT160BC Air-leg: | |
| Length of air-leg: | 1800mm |
| Propulsion stroke： | 1365mm |
| Weight： | 16.9kg |
| Cylinder dia: | 65mm |
| FY200B Oil reservior | |
| Capacity : | 200milliliter |