|
■Brief Introduction |
|
The Y11 series small circular electric connector is suitable for the strategic and tactic armament system, astronautics satellite system, the aviation navigation transport, the earth launching and receiving system, the high energy high fever industrial system, the communication and test system, the current system of transport and so on the electrical signal connection. This type product has merits such as quick coupling and quick abruption, small volume, and lightweight receptacle with coupling by inlet bayonet locking. The contact is weld. The shell includes shielding and non-shielding type, it also has normal sealed, high vacuum-sealed, high-pressure sealed and rain and dust defending function. The seal type of the receptacle has glue poured and glass fusion, and its mounting styles have flange, nut fixed and wall crossed types and so on. |
|
■Specification | ||
|
Relative Temperature |
-55℃ ~ +125℃ | |
|
Relative Humidity |
when40 ± 2℃, up to 95% ± 95% | |
|
Operating Pressure |
101.33kPa ~ 4.39kPa | |
|
Sin Vibration |
vibration frequency 10Hz ~ 2000HZ, acceleration 196m/s2 | |
|
Random Vibration |
Power spectral density of 40m2/s4Hz,the root-mean-square of 239.1m/s2 | |
|
Impact |
acceleration 980.7m/s2 | |
|
Rain Resistance |
rainfall 5mm/min | |
|
Salt Spray |
By GJB101A-97 implementation, 3.6.13 | |
|
Mechanical life |
span 500 | |
|
Electric continuity between Shells |
Not more than 0.2Ω | |
|
Electric continuity between shielding Shells |
Not more than 0.005Ω | |
|
Sealing |
glue Receptacle 02Mpa |
Glass fusion Receptacle Not more than 1×10-5Pal/s |
|
When electromagnetic interference 800MHz, the minimum attenuation is 45dB | ||
|
| ||
|
Main technical parameters | |||||||
|
| |||||||
|
Contacts Characteristics | |||||||
|
Pin-diameter(mm) |
1 |
1.5 | |||||
|
Working current(A) |
5 |
10 | |||||
|
Materials |
Copper Alloy |
Iron alloy |
Copper Alloy |
Iron alloy | |||
|
Contact resistance(mΩ) |
≤5 |
≤15 |
≤3 |
≤10 | |||
|
| |||||||
|
Insulation Resistance | |||||||
|
Standard air pressure |
Humidity |
Raining |
High temperature conditions | ||||
|
≥3000MΩ |
≥20MΩ |
≥20MΩ |
≥500MΩ | ||||
|
| |||||||
|
Voltage resistance | |||||||
|
Standard air pressure |
AC 1500Vrms | ||||||
|
Lower air pressure |
AC 200Vrms | ||||||
|
■How to order |
|
|
|
Y 11 X II - 20 41 Z J 10 -2 |
|
① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ |
|
①：Y—Series Prefix Circular Connector |
|
②：Design NO. |
|
③：categories : X-rubber seal, H- glass fusion (receptacle), P- shielding glue seal, S-copper shell glue seal |
|
④：dislocation NO. : I, II, III, IV, V, No. 1 no Tagging |
|
⑤：Shell NO. : 08,10,12,14,1, 6,18,20,22,24 |
|
⑥：Q’ty of contact : 4,7,10,1, 2,16,19,21,26,32,41,55,61 |
|
⑦：Connector type : T-Plug, Z- receptacle |
|
⑧：Contacts type : J-pin, K-socket |
|
⑨：mounting styles : 10-square flange, 11-round flange, 14-nut fixed |
|
⑩：cable coat forms : 2-jiaxianban, 5- heat shrink type 1, 5a- heat shrink type 2, 6-shielding |
|
Users may need to function in accordance with orders, production side by the functional needs of users Availability assembly, to achieve reasonable economic use
Special orders must refer to the following special structural components, according to code components for orders. Component code is Y11 - × × 00-80, Y11 - × × 00-81, Y11 - × × 00, -83, Y11 - × × 00-84, Y11 - × × 00-85, Y11 - × × 00-86 , Y11,,, - x 00-87, Y11 - × × 00-88, Y11 - × × 00-89. Middle markers "x 00", it said, the shell can be arbitrarily selected. For instance, on the 14th set of plug metal shell oven, in order to write single residues, -1400-80; To set on the 10th metal socket shell oven, then write Y11-1000-81; To set on the 18th empty shell socket, write Y11-1800-83.
Y11S series of copper cable enclosures required separate orders, codenamed Y11 - × × 00-93, structural forms and dimensions and Y11-the same × × 00-88, with a total length of 15mm. |