The EOLS-1626-X series single mode transceiver is small form factor pluggable module for duplex optical data communications. This module is designed for single mode fiber and operates at a nominal DWDM wavelength from 1528.77nm to 1563.86nm as specified by the ITU-T. It is designed to deploy in the DWDM networking equipment in metropolitan access and core networks. It is with the SFP 20-pin connector to allow hot plug capability. The transmitter section uses a DWDM multiple quantum well DFB laser and is a class 1 laser compliant according to International Safety Standard IEC-60825. The receiver section uses a high sensitivity APD detector and a limiting post-amplifier IC. The EOLS-1626-XD series are designed to be compliant with SFF-8472 Multi-Source Agreement (MSA).

Features

• Available in all C-Band Wavelengths on the 100GHz DWDM ITU Grid
• Data rates from 100Mbps to 2.67Gbps
• Available in Long Reach 80km, 120km and 200km Versions
• Temperature-Stabilized DWDM DFB Transmitter
• Duplex LC Connector
• Hot-Pluggable SFP Footprint
• Built-in Digital Diagnostic Functions as Specified in the SFF-8472 MSA
• Operating Case Temperature: Extended: -5°C to 70°C

Applications

• SONET OC-48/SDH STM-16
• Amplified DWDM networks
• Ring topologies with fixed and reconfigurable OADMs
• Fast Ethernet, Giga Ethernet
• FiberChannel 1FC/2FC

Ordering information:

Part No.	Data Rate	Laser	Distance*(note2)	Interface	Temperature
EOLS-1626-80X*(note1)	0.1~2.67Gbps	DWDM DFB	80km	LC	Extended
EOLS-1626- BX	0.1~2.67Gbps	DWDM DFB	120km	LC	Extended
EOLS-1626-CX	0.1~2.67Gbps	DWDM DFB	200km	LC	Extended

Note1: X refers to DWDM Wavelength range as ITU-T specified, please refer the following table for detailed center wavelength information. Note2: Transmission on the 9/125μm SM