Special Features
- Excellent quick automatic action without foot valve up to 8 mtrs.
- Auto suction lift upto 18 feet.
- Automatic air release during priming.
- Back pull out design, so easy maintainance without disturbing pipe lines.
- Dynamically balanced rotating parts ensure less vibrations.
- Better efficiency because of good hydraulic design.
- Minimum parts, fast repairing at low cost, Also pump is available at economical rate.
- Available in Bare, Coupled, Monobloc, Belt driven version.
- Also offered pump with trolley / trailer to move it from one place to another.
- Less expensive & easily available spares.
- Available in gland & mechanical seal as per customer's requirements.
- simple construction, only two moving parts.
- Easy inspection of impeller.
- Large diameter of solids handled . up to 50 mm
- High resistance. to abrasive liquids the wear plate is easily replaced and impeller are also available in s.s. Alloy 20, Polypropeline etc
- Easy to install :- only the suction hose is immersed in the liquid, The pump can be set up high and dry in the most convenient position for inspection and maintenance.
-Long Life :- The parts subject to wear can be easily replaced one or more times to restore the original performance.
Application
Public utilities : For pumping muddy water, sewage, polluted liquids, solid and in swimming pool.
Dewatering Basements, Trenches, Construction sites.
Onboard shift, as bildge, for desk wash & engine cooling
Tiles & Marble factories, effluent plants.
Mobile Machinery : Cooling water for marine engines and shovels.
Any application where priming is to be avoided.
Industry : Transfer of clean or dirty neutral, acid or alkali liquids containing sand, mud or solids in suspension; clean or dirty low viscosity petroleum product or solvents; milk of lime, caustic soda; washing, cooling, circulation; smoke scrubbing; emergency duty.
Civil engineering : Flood drainage; sewage pumping; fire fighting; recovery of dangerous liquids.
Naval duty : Loading and unloading; bilge pumping; washing, fire fighting, stripping, sanitary duty and circulation.
Waste treatment : Pumping polluted, hot or corrosive waster water containing sand, mud or solids in suspension; dosing neutralising liquids; pumping out settled sludge.
Construction industry : Dewatering excavation, canals or ponds; ground water dewatering with wellpoint system or drains; water supply from wells or canals; hosing down concrete castings.
Agriculture : Surface irrigation; liquid manure oxygenation; transfer and spraying liquid manure or fertilisers, distribution of liquid animal feed; transfer of must; washing.
Typical application
-Liquid containing sand mud or solids in suspension with pH from 5-13, smoke scrubbing; water emulsion for machine tools or grinders, cutting or quenching fluid circulation, cooling water circulation in steel mills or drawing mills; neutralising liquid dosage, pumping out settled sludge, sump pumping liquid manure transfer and circilation
-Water circulation in paint spray booths; stripping fuel tanks circulation
-Recovery of dirty solvents
-Transfer of light petroleum product such as diesel fuel, paraffin, kerosene and petrol (gasoline)
-Liquid fertiliser transfer, circulation and spraying, brackish or sea water containing sand
-Brackish or sea water washing, cooling or fire fighting in ports; auxiliary duties on board
-Marine duty; brine, sea intake and circulation of sea water in swimming pools
-Pumping out acid waster, transfer, of dilute acids; fruit juice or fluid food products
-Recovery of spills from chemical plant; transfer or circulation of caustic soda or potash
-At Drilling Rigs
- Excellent quick automatic action without foot valve up to 8 mtrs.
- Auto suction lift upto 18 feet.
- Automatic air release during priming.
- Back pull out design, so easy maintainance without disturbing pipe lines.
- Dynamically balanced rotating parts ensure less vibrations.
- Better efficiency because of good hydraulic design.
- Minimum parts, fast repairing at low cost, Also pump is available at economical rate.
- Available in Bare, Coupled, Monobloc, Belt driven version.
- Also offered pump with trolley / trailer to move it from one place to another.
- Less expensive & easily available spares.
- Available in gland & mechanical seal as per customer's requirements.
- simple construction, only two moving parts.
- Easy inspection of impeller.
- Large diameter of solids handled . up to 50 mm
- High resistance. to abrasive liquids the wear plate is easily replaced and impeller are also available in s.s. Alloy 20, Polypropeline etc
- Easy to install :- only the suction hose is immersed in the liquid, The pump can be set up high and dry in the most convenient position for inspection and maintenance.
-Long Life :- The parts subject to wear can be easily replaced one or more times to restore the original performance.
Application
Public utilities : For pumping muddy water, sewage, polluted liquids, solid and in swimming pool.
Dewatering Basements, Trenches, Construction sites.
Onboard shift, as bildge, for desk wash & engine cooling
Tiles & Marble factories, effluent plants.
Mobile Machinery : Cooling water for marine engines and shovels.
Any application where priming is to be avoided.
Industry : Transfer of clean or dirty neutral, acid or alkali liquids containing sand, mud or solids in suspension; clean or dirty low viscosity petroleum product or solvents; milk of lime, caustic soda; washing, cooling, circulation; smoke scrubbing; emergency duty.
Civil engineering : Flood drainage; sewage pumping; fire fighting; recovery of dangerous liquids.
Naval duty : Loading and unloading; bilge pumping; washing, fire fighting, stripping, sanitary duty and circulation.
Waste treatment : Pumping polluted, hot or corrosive waster water containing sand, mud or solids in suspension; dosing neutralising liquids; pumping out settled sludge.
Construction industry : Dewatering excavation, canals or ponds; ground water dewatering with wellpoint system or drains; water supply from wells or canals; hosing down concrete castings.
Agriculture : Surface irrigation; liquid manure oxygenation; transfer and spraying liquid manure or fertilisers, distribution of liquid animal feed; transfer of must; washing.
Typical application
-Liquid containing sand mud or solids in suspension with pH from 5-13, smoke scrubbing; water emulsion for machine tools or grinders, cutting or quenching fluid circulation, cooling water circulation in steel mills or drawing mills; neutralising liquid dosage, pumping out settled sludge, sump pumping liquid manure transfer and circilation
-Water circulation in paint spray booths; stripping fuel tanks circulation
-Recovery of dirty solvents
-Transfer of light petroleum product such as diesel fuel, paraffin, kerosene and petrol (gasoline)
-Liquid fertiliser transfer, circulation and spraying, brackish or sea water containing sand
-Brackish or sea water washing, cooling or fire fighting in ports; auxiliary duties on board
-Marine duty; brine, sea intake and circulation of sea water in swimming pools
-Pumping out acid waster, transfer, of dilute acids; fruit juice or fluid food products
-Recovery of spills from chemical plant; transfer or circulation of caustic soda or potash
-At Drilling Rigs