| Model | BTD-15-50-C |
| Booth Dimensions | |
| - Internal Size(L×B×H) | 15000×5000×5000 mm |
| - External Size(L×B×H) | 16800×5160×5900 mm |
| Foundation and Floor | |
| -Loading Capacity of Galvanized Grating | NO |
| - Surface Area | 20M2Rear air exhust plenum chamber |
| - Metal Basement | NO |
| - Drive-in Ramps | NO |
| Wall and Door | |
| - Steel Wall and Roof Panel | Double Constructio with Insulations EPS 60mm |
| -Thickness | Double Construction ,with Insulations EPS 50mm |
| 3-Folded Entrance Door With Safety Glass Window | 4300×4800 mm (B×H) |
| - Operators Door With Safety , Glass Window | 800×2000 mm (B×H) 2PC |
| Lighting | |
| - Ceiling Lightings | 16 Units, each 4×36 W,Total 2304W |
| - Side Lightings | 24 Units, each 2×36 W,Total 1728W |
| - Brightness | >1000 Lux, IP54 Grade |
| Filtration | |
| - Prefilters | Fiberglass,Paint-Stop-Filters Plate type duel filters |
| - Ceiling Filters | EU5 Fine Filters, 6 Units |
| - Floor Filters | Fiberglass, Paint-Stop-Filters |
| Ventilation System | |
| - Direct Drive Motor (Fresh Air ) |
1×7.5KW,970RPM,380V,50HZ motor certificationCE |
| - Direct Drive Motor (Exhaust Air) |
1×7.5KW,970RPM,380V,50HZ Domestic motor certificationCE |
| - Fan Capacity | 25000m3/h |
| - Air Flow Speed | +/- 0.28 m/s in an empty booth |
| Heating System | |
| - Heating Exchanger | Stainless Steel 1Gr18Ni9Ti |
| -Heating Exchange Capacity | 1×232KW(260.000cal/H) RIELLO |
| -Max. Drying Temperature | 80 °C |
| - Heating time |
10-15 min (from 20 to 60°) by Drying Phase |
| -Heating Type (on option) | Diesel / Gas Burner |
| Control Board | |
| -Control system |
Stander control Delta Depressurization start system EN60204-1-2006 |
| -Function |
Spraying ,baking, warming spray paint, emergency stop switch |
| -PLC | yes |
| -Inverter control | On option |
| -Import element | master device import element |
| -Overpressure Manometer | yes |
| - Alarm equipment | yes |
