| Model | BTD-1B Preparation-Painting and Drying production line |
| Booth Dimensions | |
| - Internal Size(L×B×H) | Preparation 7000×4000×2800mm Painting booth 7000×4000×2800mm Drying booth 7000×4000×2800mm |
| - External Size(L×B×H) | 7120×15500×3460mm |
| Foundation and Floor | |
| - Loading Capacity of Galvanized Grating | 650KG/ wheel, |
| - Surface Area | 27M2 Full Galvanized Grating gills×3unit |
| - Metal Basement | 800mm Height should be need to dig foundation |
| - Drive-in Ramps | NO |
| Wall and Door | |
| - Steel Wall and Roof Panel | Double Construction with Insulations EPS 60mm |
| - Thickness | with Insulations EPS 50mm |
| 5-Folded Entrance Door With Safety Glass Window | 3200×2700 mm (B×H) -2unit |
| -Operators Door With Safety ,Glass Window | 800×2000 mm (B×H) 2PCS |
| Lighting | |
| - Side Lightings | Preparation 24 Units, each 4×58W, Total 1392W Painting booth 32 Units, each 4×58W, Total 1856W Drying booth 4 Units, each 2×58W, Total 464w |
| - Brightness |
Preparation >800 Lux, IP54 Grade Painting booth >1000 Lux, IP54 Grade Drying booth >300 Lux, IP54 Grade |
| Filtration | |
| - Prefilters | Fiberglass,Paint-Stop-Filters Plate type duel filters |
| - Ceiling Filters | EU5 Fine Filters, 6 Units |
| - Floor Filters | Fiberglass, Paint-Stop-Filters |
| Ventilation System 1 Unit Preparation | |
| - Direct Drive Motor (Fresh Air) |
1×5.5KW,970RPM,380V,50HZ motor certificationCE |
| - Direct Drive Motor (Exhaust Air) | NO |
| - Fan Capacity | 18000m3/h |
| - Air Flow Speed | +/- 0.15m/s |
| Ventilation System 1Unti Painting booth | |
| -Direct Drive Motor (Fresh Air) |
2×7.5KW,970RPM,380V,50HZ motor certificationCE |
| - Direct Drive Motor (Exhaust Air) | 2×7.5KW,970RPM,380V,50HZ Domestic motor certificationCE |
| - Fan Capacity | 25000m3/h |
| - Air Flow Speed | +/- 0.28m/s in an empty booth |
| Ventilation System 1 Unit Drying booth | |
| - Direct Drive Motor (Fresh Air) |
1×7.5KW,970RPM,380V,50HZ motor certificationCE |
| - Direct Drive Motor (Exhaust Air) | NO |
| - Fan Capacity | 25000m3/h |
| - Air Flow Speed | +/- 0.28m/s in an empty booth |
| Heating System 1Unit Painting booth | |
| - Heating Exchanger | Stainless Steel 1Gr18Ni9Ti |
| -Heating Exchange Capacity | 2×200KW(260.000cal/H) RIELLO |
| - Max. Drying Temperature | 80 °C |
| - Heating time |
3-5 min (from 20 to 60°) by Drying Phase |
| Heating System 1Unit Drying booth | |
| - Heating Exchanger | Stainless Steel 1Gr18Ni9Ti |
| -Heating Exchange Capacity | 2×200KW(260.000cal/H) RIELLO |
| - Max. Drying Temperature | 80 °C |
| - Heating time |
3-5 min (from 20 to 60°) by Drying Phase |
| - Heating Type | Diesel |
| Control Board | |
| -Control system | Stander control Delta Depressurization start system EN60204-1-2006 |
| - Function |
Spraying ,baking, warming spray paint, emergency stop switch |
| -PLC | yes |
| -Import element | master device import element |
| - Overpressure Manometer | yes |
| - Alarm equipment |
yes |
