XTC-6 Fully Automatic Plastic Blowing Machine is applied with the most advanced international technology of maching bottles nowadays.The machine has the characteristics of automatization, high intelliggence, stable and reliable preformance, high effiency and low cost. The products are not polluted in the production links and are widely used in the production of food, beverage, cosmetics and medicine vessels.

Preformance and Advantages:

1. Being stable and reliable in automatic unscrambling and the feeding which is automatically controlled by the inventory.

2. Well-closed, no contamination.

3. Prefect oven heating system.

4. Stable revolution & rotation system.

5. The perform tubles are evenly heated easy to module during heating.

6. Less energy consumption and the heating temperature of each section of the perform tube can easily be adjusted when needed.

7. The heater tank adopts the automatic mutual feedback-loop control system and the output of constant power can be conducted automatically in proportion and is not subject to the influences of the voltage fluctuation.

  Technical Parameters:

 

TYPE	ITEM	DATA
BLOWING	Number of Cavities	6
	Height(Below Bottle Neck)	1.5m
WARM SYSTEM	Warm Unit	4
	No. of Warm Lamp	6
	Max. Heating Power	38kw
ELECTRICAL	Voltage	380V
	Frequency	50/60Hz
	Service Power	15-22Kw/h
	Total Power	42Kw
AIR SYSTEM	Operating Pressure	8-10bar
	Air Consuming	0.8-1.0m3/min
	Blowing Pressure	≥30bar
	Air Consuming	2-3m3/min
COOLING	Operating Pressure	2-4bar
	Flow Rate	3m3/h
WEIGHT	Total	5.2T
DIMENION	Main Machine	4610×2150×2100mm
	Perform Loader	2500×1500×2500mm
	Use area	5530×4520×2650mm
CONTAINER	Neck Diameter Range	φ12mm-φ32mm
	Body Diameter	φ20mm-φ70mm
	Bottle Height (Below Neck)	≤240mm
	Container volume	0.05L-0.75L
	Material	PET
	Theoretical Output	6000BPH(500ml PET Bottle) according to the bottle shape
MACHINE COLOR	Blue, gray ( according your requirement to change)