1.Cast aluminum cylinder after the initial processing of nickel-plating of silicon carbide ceramic coating ,the last to impose further honing.

2.Coating thickness of about 25 to 35 microns, the hardness of cast iron than the average high (HV>500).

3. Coating for the porous surface, in good oil, so that the surface of the cylinder and piston and piston rings at any time to maintain a high degree of lubrication, contact the pieces will not scratch, and also to reduce wear.

4. Proportion of aluminum alloy cast iron is 0.35 times the weight of cast iron only about 1/3,and thermal conductivity of cast iron is 2.3 times, the accumulated combustion engine heat spread quickly, maintain an appropriate level in the engine operating temperature to avoid too high temperature caused by mechanical lubricant film have a scratch off, or spare parts due to high loads and fatigue damage.

5.Alloy plating due to the outstanding features of ceramic cylinder, the engine can operate in a more harsh conditions without damage, the engine can adjust the conditions of the engine makes to enhance horsepower, reduce fuel consumption.