Tortoise shell mesh

Materials: A type carbon steel 0Cr13.1Cr13...0Cr18Ni9.1Cr18Ni9Ti, with mesh spacing 2cm-6cm, thickness 1cm-2.5cm, thickness 1mm-3mm.

Characteristics: It has excellent performance of anti-abrasion and strength. Anti-abrasion lining is fixed with tortoise shell meshes of A3F carbon steel, such as reactor and Class I or II whirlwind separator, and U-shaped regenerator pipes, some parts are supported with tortoise shell meshes made of alloy 1Cr13, such as regenerator, Class I or II whirlwind separator.

Advantages: Its has a hexagonal meshes and large mud claws, to help fixing the adhersion with heat-resistant materials, preventing peeling or fall off.

Application: To help fixing lining materials.

Netting Sizes: We have made dozens of sizes of parts for OEMs, including large petroleum chemical mechanism, special for catalyzering device.

Tortoise shell meshes are made by perforating flat steel belt of 20*17.5mm and fixing them to a board.

Operation procedure is: To tack up the mesh by welding to the inner wall of boiler or hot wind pipes, then to smear heat-resistant materials.