Low carbon steel cut wire shot/low carbon steel wire shot- conditioned

size available:0.2mm-2.5mm

material: low carbon wire Q195

chemical composition: C:0.06-0.12%  Mn:0.25-0.5%  Si≤ 0.3%  S≤0.05%  P≤0.45

density: 7.84g/cucm

hardness:30HRC

 

Feature

1. As cylindrical or spherical cut wire is produced by new steel wire, it is absolutely free from micro structural defects, like presence of hyper entectole carbides and porosity                                     2. The size is stabilized due to the drawing process control and the cut process control

3. Equal hardness and excellent homogeneity because of high quality of raw materials and quality control methods

4. Higher durability compare to cast steel shots; steel cut wire shot or steel wire shot(spherical shape) is four times as efficient as steel shot

5. The components peened with conditioned cut wire shots have a greater fatigue life than the same components peened with cast steel shots

6. Less dust during operation contribute to a better work enviroment

7. Obviously effet on surface of parts, very bright and clean

8. Low wastage during operation

9. Reduce the time for shot peening and save electricity

10. Cut down maintenance cost of shot blasting machines and decrease production cost

11. Durability : 3000 circles to 8500 circles

12. High strength and non-friable, used by a wide range of machinery, equipment, vessel, container