XTC-3 Fully Automatic Plastic Blowing Machine is applied with the most advanced international technology of maching bottles nowadays. The machine has the characteristics of automatization, high intelliggence, stable and reliable preformance, high effiency and low cost. The products are not polluted in the production links and are widely used in the production of food, beverage, cosmetics and medicine vessels.

Preformance and Advantages:

1. Being stable and reliable in automatic unscrambling and the feeding which is automatically controlled by the inventory.

2. Well-closed, no contamination.

3. Prefect oven heating system.

4. Stable revolution & rotation system.

5. The perform tubles are evenly heated easy to module during heating.

6. Less energy consumption and the heating temperature of each section of the perform tube can easily be adjusted when needed.

7. The heater tank adopts the automatic mutual feedback-loop control system and the output of constant power can be conducted automatically in proportion and is not subject to the influences of the voltage fluctuation.

Technical Parameters:

TYPE	ITEM	DATA
BLOWING	Number of Cavities	3
	Height(Below Bottle Neck)	1. 5 m
WARM SYSTEM	Warm Unit	4
	No. Of Warm Lamp	6
	Max. Heating Power	30 kw
ELECTRICAL	Voltage	220/380 V
	Frequency	50/60 Hz
	Service Power	12-18 Kw/h
	Total Power	35 Kw
AIR SYSTEM	Operating Pressure	8-10 bar
	Air Consuming	0. 8-1. 0 m3/min
	Blowing Pressure	≥30 bar
	Air Consuming	1. 2-2. 0 m3/min
COOLING	Operating Pressure	2-4 bar
	Flow Rate	3 m3/h
WEIGHT	Total	2. 6 T
DIMENION	Main Machine	2500×1600×2050 mm
	Perform Loader	2500×1350×2550 mm
	Use area	2950×3450×2550 mm
CONTAINER	Neck Diameter Range	φ12 mm-φ32 mm
	Body Diameter	φ20 mm-φ70 mm
	Bottle Height (Below Neck)	≤240 mm
	Container volume	0. 05 L-0. 75 L
	Material	PET
	Theoretical Output	3000BPH(500ml PET Bottle) according to the bottle shape
MACHINE COLOR	Blue, gray ( according your requirement to change)