1,Thermostatic & flow rate combination with single handle controlling temperature & flow rate

2,Discharge flow rate: 12 L/min when supply pressure at 0.3 Mpa & outlet temperature at 38℃

3,Unique ceramic disk design which enlarges the turning angle to 180℃ with higher sensitivity of temperature adjustment

4,With check valves inside inlet connectors to avoid cross-flow due to unbalancing hot/cold water pressure . Easy to clean the filter gaskets installed outside the inlet connectors .

5, Outlet temperature stable with lower interference by inlet temperature & pressure fluctuation .

6, If cold water supply fails, flow rate would be minimized even shut off, avoid the risk of scalding