The hammer mill of 40、50、60、65 type are special products. It is the most ideal grinding equipment of all kinds of stalk, weed, corn, soybean, PVC foaming board,rubber, and etc. Structure reasonable, firm durable, safe reliable, easy operation, the vibration small, and the efficiency is high. It is widely used in the professions such as fodder factory, cultivation factory, organic fertilizer factory, Chinese medicine, chemical industry and so on.
Technical Parameter:
Model |
SG40 |
SG50 |
SG60*27 |
SG65*55 |
SG65*75 |
Diameter of rotor(㎜) |
400 |
500 |
600 |
650 |
650 |
Width of studio(㎜) |
205 |
275 |
275 |
550 |
750 |
Rotate speed (r/min) |
3400 |
3100 |
2950 |
2950 |
2950 |
spec of screener (㎜) |
675×200 |
750×270 |
940×270 |
540×1020 |
740×1020 |
Linear Velocity |
71 m/s |
81 m/s |
92 m/s |
100 m/s |
100 m/s |
Spec of hammer (㎜) |
120×40×4 |
180×50×5 |
180×50×5 |
180×50×5 |
180×50×5 |
Hmmer qty (pieces) |
4×3=(12) |
4×4=(16) |
6×6=(36) |
6×8=(48) |
6×18=(108) |
Related power (kW) |
7.5 |
15 |
22 |
30/37 |
45/55 |
Model of bearings |
1307 |
1310 |
2315 |
2316 |
2316 |
Wind absorbed quantity (m/min) |
5 |
11 |
18 |
22/25 |
33/38 |
Weight (kg) |
90 |
180 |
280 |
1200 |
1500 |
Raw material |
Holes of screener(mm) |
Capacity(T/h) | ||||
TYPE-40 |
TYPE-50 |
TYPE-60 |
TYPE-65×55 |
TYPE-65×75 | ||
Stalk |
φ6 |
0.2-0.5 |
0.3-0.6 |
0.5-1 |
0.8-1.5 |
1-2 |
Corn |
φ3 |
0.8 |
1.2 |
1.5 |
2-4 |
3-5 |
Note: This parameter is got on the condition of well installation, air-inhaling and work normally.
The component of raw material is not bigger than 14%, the rate of opening holes is below 33%.