|
（GRADE） |
（TRS） ≥N/mm2 |
(HRA) ≥ |
Recommended Applications |
ISO classification |
|
KLT105 |
1100 |
93. 5 |
Carbide with higher wear resistant, suitable for the finishing of high-density alloys, nickel based high-temperature alloys, cast iron, non-ferrous metals, rubber, glass, harden steels. |
K01 |
|
KLT110 |
1300 |
92. 0 |
Suitable for the machining of cast iron and non-ferrous metals, in particular suitable for the finishing and semi-finishing of aluminum materials. |
K10 |
|
KLT120 |
1600 |
91. 5 |
It can be used for the semi-finishing and rough machining of the series cast iron, high-temperature alloys, stainless steels, high manganese steel. |
K20 |
|
KLT130 |
1800 |
91. 5 |
The grade have the better wear resistant, toughness and strength, oxide resistant, heat conduction, suitable for the roughing and semi-finishing of the high-temperature alloys, titanium alloy, stainless steels, cast iron under unfavorable working conditions. |
K30 |
|
YG6X |
1400 |
91. 5 |
Suitable for machining of chilled cast iron and refractory alloy, it can be used for semi-finishing and finishing of cast iron. |
K10 |
|
YG6A |
1450 |
91. 0 |
Suitable for semi-finishing of hard cast iron, non-ferrous metals and alloys, and can be used for semi-finishing and finishing of high manganese steel. |
K10 |
|
KLT235T |
1900 |
90. 5 |
It have better wear resistant, high toughness and strength, suitable for the rough machining and punchy cutting of carbon steel, alloy steel, refractory steel and manganese steel. |
P35 |
|
KLT420 |
1300 |
92. 0 |
TiCN based cermet, it is suitable for semi finishing of steel, alloy steel, stainless steel, high strength steel and bearing steel. |
P20 |
|
KLT430 |
1500 |
91. 5 |
TiCN based cermet, it is suitable for milling of cast steel, alloy steel, stainless steel, high strength steel. |
P30 |
|
KLT445 |
1800 |
87. 0 |
ICN based cermet, it have higher strength and toughness. |
P45 | |
