Allotypic Wood Engraver

Equipment Features:

Adopt imported square orbit, double slippers, bearing heavy, working steadily, high precision, and long life time. Imported ballscrew, high precision for cutting.

Adopting advanced DSP system, operated with the handle, convenient operation, humanization design. Unique intelligent budget principle, fully develops the potential of the motor and lead to high processing speed, the synchronization of curves and straight lines, smoother curves.

Well compatibility: CAD/DAM designing software e.g.

Type3/artCAM/Castmate/Wentai etc.

Vacuum table with 6 vacuum zones, which can adsorb different size

Materials. No oil vacuum pump, high suction, more convenient, stable capability.

Adopt high speed stepper motor and driver, and two motors for Y axis.

Max speed is 35M/MIN. Auto Aligning System with air cooling spindle highly upgrade the processing speed.

Technical-parameters: Model MW-1530 MW-2030 MW-2040

X,Y working area 1500×3000mm 2000×3000mm 2000×4000mm

Z working area 200mm 200mm 200mm

Table size 1680×3500mm 2180×4000mm 2180×4500mm

Max feeding ＞25m/min ＞25m/min ＞25m/min

Work-holding By suction By suction By suction

Processor DSP 100MHz DSP 100MHz DSP 100MHz

Interface USB USB USB

Command *.u00*.u00*.mmg*.plt *.u00*.u00*.mmg*.plt *.u00*.u00*.mmg*.Plt Surroundings for software DSP DSP DSP

Power(not include the spindle) 2500W 2500W 2500W

Power AC380V/50Hz AC380V/50Hz AC380V/50Hz

Main axle power rate 4.5KW 4.5KW 4.5KW

Main axle rotating speed 0-18000rpm/min 0-18000rpm/min 0-18000rpm/min

Word Mode stepper Stepper stepper