Torque Wrench, Torque Spanner, Torque screwdriver, Torque Tools

BA TYPE PRE-SETTING TORQUE WRENCH
1. CHARACTER:
1). It has the function of pre-setting torque value and signal device. You can hear the sound Click when arrive at the scheduled torque, meanwhile, you have the obvious feeling of hand vibration. Automatic recovery when the action released.
2). Use the special high quality aluminum alloy material on the shell.
2. USAGE:
1). Please pre-set the torque value according to your request.
2). Draw out the red plastic handle at the end of the wrench, then bend, circumrotate and adjust the torque value on the staff. After adjustment, push the red handle to the original place.
3). Equip the socket on the square of the wrench, hitch the Fasteners, and force the handle slowly. It is finished if hear the sound click (As the scheduled torque value)
4). Moving back to the min value if you dont use it for a long time.

TL TYPE PRE-SETTING TORQUE WRENCH
TLD TYPE PRE-SETTING TORQUE DRIVER
1. CAPABILITY AND CHARACTER:
1). Pre-setting torque value
2). It will have racing if exceed the asked torque value
3). The left and right torque value can be controlled
4). Precision +-5%
5) Available standard: 0.21.2N. M 0.53N. M16N. M

BRITOOL PROFESSIONAL ADJUSTMENT TORQUE WRENCH
It can be used in screw thread fasteners with torque requirement. (For example, the nuts, the bolts)
1. CHARACTER:
1)It has the function of pre-setting torque value and signal device. Y You can hear the sound Click when arrive at the scheduled torque, meanwhile, you have the obvious feeling of hand vibration. Automatic recovery when the action released.
2)You can switch two directions. Press the square rabbet to make the other square forced, the wrench can be added the power anticlockwise.
3)It is robust and long life because of alloy steel material. Calibration is ascended to the NBS.
4)Precision is accredited with ISO 67891992. ASME B107.14, GGG - W-686 +- 4%
2. USAGE:
1). Please pre-set the torque value according to your requirement.
2). Draw out the orbicular adjustment key at the end of the wrench, then bend, rotate and adjust the torque value on the staff you need. After adjustment, push the key to the original place.
3). Equip the suitable socket on the square of the wrench, hitch the fasteners, and force the handle gently and slowly. You should force it as the arrowhead shows. It is finished when hear the sound click ( Arrive at the pre-setting torque value)
4). Use the crowbar when we use the big standard torque wrench. It can make laborsaving if you connect the crowbar to the wrench handle.
5). Moving back to the min value if you dont use it for a long time.
3. Torque Range: N. M:

BRITOOL 1-5Nm, 2-10Nm, 4-20Nm, 5-25Nm