1.Safe and quiet operation, completely submersible water pump.
3.Gather pump, oxygen increasing and filtration as a whole.
1. Fluid temperature up to 35 oC
2.Maximum ambient temperture 45-70oC
Application:
1.Suitable for , ponds, aquariums, craft products, fresh water, marine water, Air conditioner, Cooling system, Circulation system, Garden ornamental, Gather oxygen and industrial tanks.
Low Voltage Fountain Pump
Model: HSB-180LV
Input Voltage: AC12/24/100/120/220-240V 50/60Hz
Watt:2.5W
Hmax:0.5M
Flow Rate:200L/H
AC TRANSFORMER:
UL/cUL Standard, CE/GS Standard, BS standard, KC standard, SAA standard
1.CAUTION
Always disconnect from electrical outlet before handling the pump.
Don’t let the pump run dry.
Don’t lift the pump by the power cord.
Operate pump completely submerged for proper cooling.
The supply cord of this appliance should be discarded.
disconnect the appliance form supply mains before putting hands into water.
2. PERFORMANCE
A clogged or dirty intake screen will greatly reduce performance. If the pump is used on a dirty surface, raise it slightly to reduce the amount of debris contacting the intake. If less flow is desired, adjust the flow control lever.
3. MAINTENANCE
To clean the pump, remove the front plate and the impeller. Use a small brush or strearn of water to remove any debris.
4. CAUTION: THE PUMP FAILS TO OPERATE, CHECK THE FOLLOWING:
Check the circuit breaker and another outlet to ensure the pump is getting electrical power. NOTE:Always disconnect from electrical outlet before handling the pump. Check the pump discharge and tubing for kinds and obstructions Algae build up can be flushed out with a garden hose.
Remove the pump inlet to access the impeller area. Turn the rotor to ensure it is not broken or jammed.
monthly maintenance will add to your pump's life.
NOTE: ensure that the electrical cord loops below the electrical outlet to form a'Drip Loop' This will prevent water from running down the cord into electrical outlet.