This machine has a high automatic degree, each electrical machinery convey adopt frequency conversion governor, each components and parts movement degree have touch-sensitive screen interface design which is more humanization and was controlled by photoelectric switch and whole PLC, it’s easy and simple to operate and having automatic energy-conserving disconnected types of working systems.
This production line includes: The vertical conveyer, washing and drying station, inspecting station, aluminum frame assembly station, glass storage station, press robot, output conveyer, and tilting table. The line can be used to complete the glass cleaning and drying, the aluminum frame position, and presses the glass plate, tilt the glass into the level position and move out. This production line has highly efficiency, low consumption, small space, ease of operation and so on.
Entire machine technical parameter：
Ways of Slice Joint: Automatically in the Press Plate.
Transmit Direction: Facing equipment, from left to right
External Dimensions: 24200×3800×3450 mm
Power: 39.81KW
Washing Speed: 2-12m/min
Max. Speed: 45 m/Min (basis demand, but also may enhance)
Single glass Thickness: 3-12 mm
Insulating Glass Thickness: ≤40 mm
Max. Dimensions： 2450×3000mm (Normal)
2450×3500mm (Ultra Long)
Min. Dimensions： 400×280 mm
Operational height: 450 mm
Equipment load-bearing capacity: 125kg/M
No sealant output: 700 pieces of /8 hour (1 meter long normal type glass)
Time cycle: 30--40s
Input voltage: 380v 50HZ
Stored air pressure: 0.5-1.0Mpa
Overturn Height: 940mm
Gross weight: Approximately 7500kg