FUGE technology Co., Ltd. Adhering to the principles of energy conservation, environmental protection and efficient production,Qualifying as the high-end level in theInvestment casting equipment Industry and high competitiveness in theWhite hot international market competition. 

When comes to investment casting machine making, FUGE takes a fast evolving andaPrecise approach.

Fast:Fast evolving: continuously updating for 20 years, reaching the top level of equipment. Equipment range:?800mm-?2000mm (table below)

1	Equipment model:	FG-TLF800	FG-TLF1000	FG-TLF1200
2	Design pressure:	1.0MPa	1.0MPa	1.0MPa
3	Design temperature:	183.2℃
4	Working pressure:	0.9 MPA
5	Working temperature:	≤179℃
6	Pressure balance time:	Not more than 5 seconds (at 7kg pressure)
7	Inner tank size:	Φ8001000	Φ8001200	Φ8001500
8	Dewaxing time:	060min (Adjustable)
9	Heat recovery device	(Optional, non-standard)

1	Equipment model:	FG-TLF1400	FG-TLF1600	FG-TLF2000
2	Design pressure:	1.0MPa	1.0MPa	1.0MPa
3	Design temperature:	183.2℃
4	Working pressure:	0.9 MPA
5	Working temperature:	≤179℃
6	Pressure balance time:	Not more than 5 seconds (at 7kg pressure)
7	Inner tank size:	Φ14001600	Φ16001800	Φ2000x2200
8	Dewaxing time:	060min (Adjustable)
9	Heat recovery device	(Optional, non-standard)

 

 

Fast speed: theAutoclave bodyhas the double tank pressure vessel,Could achieve fast filling-in time and the pressure balance time is less than 5s (when at 0.7mpa pressure).

wax shell automatically in and out, easier to operate, time-saving and requires less effort and the Access timeis ≤4 minutes.

the machine is also equipped with an Automatic opening Gate& aAutomatic water supply system, ensuring personnel safety, improving production efficiency,Making all kinds of false alarms easy to be seen atoneGlance.

Fast maintenance:the autoclave isEquipped with Siemens PLC-based control system, allows the engineer to monitor and diagnose the equipment's running process remotely.

Tunnel-visioned:

We pay close attention to our product's quality, every FUGE people dare not to relax just to ensure equipment's quality.

from drawing to cutting to assembling to testing run, to the sending to the final factory, every step is strictly controlled during the production process. Every factory equipment will be tested and reviewed repeatedly according to the technical protocol.

We pay close attention to the after-sales customer service as well, Fuge promises, no matter whether your equipment is in the warranty period or not, no matter how many years your equipment has been used, whether is an artificial or non-human factor caused problem. FUGE will respond to your equipment problems within 72 hours and actively cooperate to solve your problems.

OUr Musts:

Because energy saving and environmental protection is the main theme of our new era. Fuge dewaxingAutoclave adopts the new thermal insulation material, has the quality of low thermal conductivity, good thermal insulation, reduces fuel consumption. The internal surface temperature of theAutoclave is always kept above 150℃ to reduce distilled water in the Autoclave and wax to reduce waste. Its also equipped with an energy recovery device, which greatly improves energy recovery efficiency.

KEeping up with the International standard: focusing on producing high-end equipment is FUGE's motto since our establishment. More than 20 years we do not forget from where we started, that's why we became the pride of the domestic investment casting equipment market.FUGE never stopped running on the international track. FUGE people are constantly rushing between the exhibitions and technical forums, never stop learning from others

 

PRecision: as big as the appearance design, as small as the detail processing. We strive to Keep up with customer requirements, accept private customization, and strive to make each of our customers satisfied.

 

OurIntegrity has made our brand, and quality has become fuge's brand.