|
Features |
|
>>Used for milling all kinds of water slots and air pressure balance grooves.
>>Two milling heads (upper and lower) are set to satisfy various profile processing requirements.
>>Clamp once can realize two-direction slots and holes' processing.
>>The length of milling water slot within 60mm is adjustable and use widely.
>>Milling head's angle and the position of its operating table, which is adjustable, can meet different profiles and positions' processing requirements.
>>Apply to high grade and mass windows production. |
|
Parameter |
|
Input Voltage;220V/50Hz
Input Power:1.52(kW)
Air Pressure:0.5～0.8(MPa)
Air Consumption:30(L/min)
Main-shaft Revolution:25000(r/min)
Cutter Diameter:φ5&φ4(mm)
Slot Depth:30(mm)
Slot Length:30～60(mm)
Overall;Dimension:1925×750×1600(mm)
Weight: 320(kg) |