■>>Used for auto profile 45°and 90°cutting, V cutting, water slot milling, air pressure balance hole milling and other holes and grooves milling.

>>Automatically finishing processing and recognizing for profiles from cutting to milling, and controlled by industrial computer automatization.

>>Main components including center control table, auto-conveying device, manipulator, cutting device, milling device, auto-discharging device and scrape conveying device, etc.

>>Many profiles in the auto-conveying table can automatically feed.

>>Computerized manipulator automatically recognizes different profiles and locate.

>>Two-axis computerized milling cutters in the milling device can mill various of water slots and holes according to different requirements for profiles.

45°-90° angle and V notch would be cut automatically in the cutting device.

>>Advanced technique, high automatization, good performance, operating simply and using widely.

>>Automatically program and select processing programs.

>>Optimizing the processing and making good use of profiles

▲Input Voltage:3N～50Hz 380/220V

Input Power:18(kW)

Air Pressure:0.6～0.8(MPa)

Air Consumption:200(L/min)

Processing Profile Height:35～130（mm）

Processing Profile Width:30～120(mm)

Processing Range:400～6000（mm）

Overall Dimension:12500×3500×2400 (mm)

Weight:4200 (kg)