EM-ID & Mifare Card Reader

DC 5V-16V Working Voltage

Less than 80mA Static Current

5～10CM Reading Range

Support EM-ID Card or MIFARE 1 Card

0℃ to 70℃Ambient Temperature

10% to 90% Ambient Humidity

International Standard Wiegand Interface

More than 100M Communication Distance

Installation

Using "+" type screw driver to loosen the screw between the panel and motherboard. And then embed the motherboard to the side wall with the plastic plug and screws.

Wire Connection

Red DC 5V-16V

Black GND

Blue D1

White D0

Brown BEEP

Green LED

Yellow Alarm

Notice:

1. Confirm the electric voltage (DC12V) and differentiate positive anode and cathode of power supply.

2. When external Power is used, make sure sharing the power with Controller Box or using the same GND.

3. When the distance between card reader and controller is more than 50m, please use Power Line with at least 1.5 square cm Dia, or using several parallel Network wires.