The IP-1010 voip phone are slim VoIP phone design for basic use, with PoE design, it is used in some IP PBX system, applied in Hospital, Hotel. PoS system, etc.
Networks Features
- Basic NAT and NAPT
- NAT ALG
- PPPoE for xDSL, automatically keep alive
- DHCP Client on WAN
- DHCP server on LAN
- DNS client with 2 servers IP
- SNTP
- 802.1P QOS
- 802.1q
- Network utilities: ping, trace route, telnet client
Call Function
- Flexible Dial Map: Fix length, End with #, Dial Map Table, Dial with time out
- Hot Line service
- Block call
- Black list
- Limit dialing out No. list
- No Disturb
- Dial out authentication
- Peer to peer SIP call
- Forward(Off, Always, Busy, No Answer)
- Call Waiting
- Call Hold
- Call Transfer(Blind Transfer, Attend Transfer, Half Attend Transfer)
- Three party conference
DSP Features:
- G.711A/u
- G.7231 high/low
- G.729
- RFC2833
- DTFM relay
- SIP Info interoperate with CISCO SIP device
- Jitter Buffer
- Packet Loss Compensation
- G.168 echo cancel
- VAD
- CNG
SIP Features:
- RFC3261, RFC3262, RFC3666, RFC2543 Proxy and Register
- SIP domain
- Server authentication: none, basic, MD5
- DNS name of SIP server
- SIP signaling port setting
- NAT transverse, STUN
- NAT transverse, SIP Express router
- Pubic Server/ Private server. Can connect to ISP and Private SIP server at same time
- Dual public server
- SIP INFO for DTMF, interoperate with CISCO SIP device
- Each password for each number
VOIP PHONE Specifications
Port WAN 10/100Base T RJ-45 for LAN
Port LAN 10/100Base T RJ-45 for PC
Adapter (Input/output/frequency) 100-240VA/7.5VDC/60Hz
Power Consumption 1.8W/1.4W
Protocol SIP
Operating Temperature 0-50%
Relative Humidity 5-65%
Dimensions 215x185x145mm (L x W x H)