Technical Parameters
Materials: Cold rolled steel coils / Colorcoated steel coils / Precoated steel coils
Thickness: 0.251.0mm
Width: Max1001250mm
Line speed: Max 20m/min
Machine Size: 1700mm 1300mm 1200mm (length Width Hieght)
Mo. Of slitting: Max 9 slits
1. The machine is widely applicable for cutting of nonmetal materials in various industries by die cutter. For example leather, rubber,plastic, plastic packing, textile and chemical fibre etc.
2. Adopt double oil cylinder, four-column,precise double-crank connecting rod mechanism, which can guarantee that the cutting depth at every cutting position is same.
3. With special setting mechanism, and equipped with die cutter and cutting depth setting, the travel adjustment is simple and accurate.
4. The pressing board of cutting carries out slow cutting when it contacts the die cutter, which can make that there is no size error between the uppermost layer and lowermost layer of cut materials.
5. The central oil supply automatic lubricating system guarantees machine precision and prolongs service life of machine.
6. The operation is labor-saving and simple, with low malfunction, strong cutting power and high cutting speed.
7. Operation with two hands makes high safety.
|
1) |
work material: cold rolling steel, colored coiled plate, acid picking coiled plate which δb<=450Mpa δs<=260MPa |
|
2) |
material thickness: s=0.40 - 2.5 mm |
|
3) |
original width: 500mm-1320mm |
|
4) |
slitting tolerance: width difference:+/-0.10 mm(when thickness 0.5-2.5mm); |
|
5) |
slitting tolerance: linear 0.2 mm/m |
|
6) |
dividing burr: <=0.15*thickness |
|
7) |
slitting speed: 0-20m/min |
|
8) |
decoiler load: 10 Ton |
|
9) |
original coil inner diameter: dia.500-700mm |
|
10) |
original coil outside diameter: <=dia.1400mm |
|
11) |
product coil inner diameter: dia.600-800mm |
|
12) |
product coil outside diameter: dia.1400mm |
|
13) |
product coil load<=10 tone |
|
14) |
min. product width: 60mm |
|
15) |
slitting quantity.: 0.4-1.0 mm thickness - 20 pcs.
1.5-2.5 mm thickness 18-10 pcs. |
|
|
Number of slitting blade 15 pcs. (depend on customer requirement) |
|
|
Material of slitting blade: 9CrSi; |
|
|
Hardness of blade: HRC58°-60° |
|
16) |
total power of motor: about 15,2 KW |
|
17) |
total weight: 5.3 tone |
|
18) |
area needed: 20000x8500mm(length x width) (around) |
COMPOSITION
|
1) |
Hydraulic single-head decoiler: |
1set |
|
2) |
Guiding plate for feeding: |
1set |
|
3) |
Lateral register device |
1pc |
|
4) |
Slitting machine: |
1pc |
|
5) |
Batching-up device for waste selvage: |
2pcs |
|
6) |
Partition device: |
1set |
|
7) |
Expansion device: |
1pc |
|
8) |
Diverting roller and bed-plate for batching-up: |
1set |
|
9) |
Recoiler |
1pc |
|
10) |
Hydraulic pneumatic system: |
1set |
|
11) |
Altivar French automatic control system + Electric system: |
1set |
|
12) |
Distance piece for slitting knife and separated rubber ring: complete with slitting knife accordingly. |
