Comply with latest international standard prEN13060.

 

The WEGO sterilizer is a high speed, high vacuum, high capacity, Class B sterilizer designed to cover a large field of applications for the medical field, as well as private clinics and dental offices. The WEGO autoclave serves the requirements for outstanding performances along with compact dimension and impressive design, This tabletop autoclave is designed for sterilization of medical and surgical materials such as packed & wrapped solids, instruments and narrow lumen, suitable for sterilization of porous materials and hollow devices (high-speed and low-speed hand piece) in dentistry, surgery, lab.

 

 

Technology advantage:

 

1.      16-bit micro processor imported from USA, the system is powerful and reliable;

 

2.      Touch key and menu control, total 5 sterilization programs available;

 

3.      Involve BD test and Vacuum test procedures; Air leakage rate signified by a pressure change shall be less than 0,13 kPa/min.

 

4.      Builted-in vacuum pump, pulse vacuum 3-6 times can reach -0.09MPa(-0.9Bar), to ensure effective removal of the air so as to get the optimum saturate steam.

 

5.      High penetration ensure the high steam penetrate into the dressing, disinfect bags and dental hand piece intervals quickly, so as to ensure sterilization thoroughly.

 

6.      Unique pulse vacuum drying procedure, can reach -0.09MPa. the residue moisture shall be less than 0.2%.

 

7.      LCD dynamically displays status, temperature, pressure and time.

 

8.      Perfect fault check system and display the fault information;

 

9.      Equipped with mini printer to document the performed cycle

 

10.  The beep will sound once the sterilization cycle complete.

 

 

Safety feature

 

Heater protect: the system will cut off its power supply once the temperature exceed the preset one, and show the alarm information.

 

Anti-dry heating: the system will cut off its power supply once the water level is lower than the heating pipe, and show the alarm information.

 

Safety interlocking door: electronic lock to ensure the sterilizer can begin to work only if the door is closed properly. The door can’t be opened when the chamber is pressurized,  or the power supply is not connected.

 

Over-temperature and over-pressure protect: When the inner temperature or pressure exceed the limit, the system will start up procedures to lower temperature and release pressure.

 

Automatic release safety valve: When the chamber inside pressure exceed preset value, the safety valve will release automatically.

 

Electricity protect: Designed protect function in case of short circuit and leakage current.

 

 

Main parameter:

 

Design pressure: 0.26MP a

 

Sterilization temperature: 121℃-134℃

 

Max. working pressure: 0.22Mpa

 

Max. vacuum: -0.09MPa

 

Design temperature: 150℃

 

Temperature homogeneity in the chamber: ≤±0.5℃

 

Water supply: distilled water or purified water

 

Chamber material: SUS304 stainless steel