KST-RFBM  Four Channels RF Receiver

 

Title: 12V four channels RF control with fixing code

Model: AK-RK04S-12A

 

General Introduction: Our four channels RF Receiver send open signal and close signal to 4 relays, can make controlled facility to turn clockwise or anticlockwise, also can make switch conversion between connecting or cutting off. Mostly used in these fields, electric door, electric window, winding facility, path strobe, lifter, industrial controls and safe protection. The RF receiver has high stability, low power, and use expediently; no need traditional connecting line or dial fixing code switch, relay only need receive and store the signal from the remote controller.

 

1. Using range:

  Garage gate.

2. Technical Spec:

1.       Operating voltage: DC12V

2.       Static current: ≤12MA

3.       Output current: ≤7A 240VAC | 10A 24VDC

4.       Operating frequency: 315MHz 433.92MHz

5.       Receiver sensibility: 105dbm

6.       Operating temperature: -20℃ - +80℃

7.       Size: 68*48*17mm

3. Notice:

  1. Don’t operate the remote control too fast, nest operation should after1 seconds between the first operation.

  2. When the LED light go dark or the control distance go short, please change battery.

  3. Setting antenna is very important, can’t connect to wrong place.