|
CF(Compact Flash) to 2.5"IDE Adapter for Laptop:44P Male Single
|
44PIN MALE CF To IDE(IDE-CF) Adapter is an adapter for connecting a compact flash memory card to a 2.5'' host interface, aiming at educational sectors, IT development, and the embedded technology enthusiast to enable the use of a compact flash card as an IDE hard drive.As a result, any equipment, such as Notebook computer, that uses a 2.5" IDE hard drive can be easily converted to use the low power and shock resistant CF media. |
Specification & Features
| * |
Support only Single CF . |
| * |
Very helpful for embedded system designers and engineers |
| * |
No driver required |
| * |
Master / Slave mode selection |
| * |
male, 44-pin IDE connector . |
| * |
You can boot from Dos/Windows/Linux with CF, same as IDE hard drives, but much faster Master/Slave jumper ,with DMA MODE,support CFI/CFII cards |
| * |
Power input: don't need extra power supply. |
|
|
|
DATASHEET:
Interface:
|
mini 44-pin IDE Male (2.5" IDE hard drive connector) |
| Supported media |
Type I/II CF and MicroDrive |
| Maximum Read / Write Speed: |
Depends on the media |
| OS Support: |
DOS, Windows 3.1, NT, 98SE, Me, 2000, XP, Vista, Mac OS 8.6 or higher, Linux |
| Dimensions: |
(W x D x H) - 45 x 6 x 52 mm for 44-pin IDE |
| Power: |
-- |
| Storage Temperature: |
-20 °C to + 60 °C |
| Storage Humidity: |
5 - 90% | |
